What is moistureproof MDF?
Moistureproof MDF, originated in Europe, is also known as melamine MDF. The reason why moistureproof MDF is moistureproof is that a certain proportion of moistureproof particles are added in the production process of its base material, which can greatly reduce the degree of expansion of MDF when meeting water. The general moistureproof MDF is also very guaranteed in terms of environmental protection. Nowadays, moistureproof MDF is widely used in home decoration. Because it can prevent moisture, it is generally used to create cabinets and furniture.
Four advantages of moistureproof MDF: moistureproof, environmental protection, high cost performance and no deformation
It goes without saying that moistureproof MDF has the greatest advantage of moistureproof. When producing moistureproof MDF, certain moistureproof particles need to be added. These moistureproof particles have a very strong role in moistureproof and dehumidification. The main glue added to the moisture-proof MDF is melamine glue. Melamine is a formaldehyde free solution, which is environmentally friendly, so it is very environmentally safe. In addition, moistureproof MDF not only has a beautiful appearance and rich styles, but also has good physical properties such as wear resistance, scratch resistance and deformation resistance. At the same time, the production process of moistureproof MDF is not complicated and there are many manufacturers, so the price is relatively reasonable and cost-effective.
However, the biggest disadvantage of moisture-proof MDF is that it is not waterproof! Waterproof MDF must be moistureproof, and moistureproof MDF’s performance is just moistureproof. So don’t mistake moisture-proof MDF waterproof. The essence of moistureproof is that its surface has a moistureproof layer, which can isolate moisture to a large extent, thereby reducing the expansion rate of moistureproof MDF. If the surface of the moisture-proof MDF is scratched carelessly, the effect will not be very good. If the sealing edge falls off, it will expand due to contacting too much water vapor, so it needs to be filled in time after the sealing edge falls off.
