UV wood based panels,inspection checklist ,factory auditing,sourcing service,Laboratory testing ,inspectors

UV wood based panels  is receiving great attention from the market

Guide: Because of its better environmental protection performance, the UV paint production line has once again demonstrated its charm in this massive environmental remediation action. I believe that in the near future, uv wood based panels  will enter a new stage of development.

Uv wood based panels , also known as painted wood based panels , is a natural and environment-friendly decorative panel. After the wood based panels  is processed, the UV paint curing process is accessible, and the surface of the wood based panels  is covered with a layer of environment-friendly UV paint. Places with high requirements for decoration and environmental protection. It can avoid painting pollution. The construction period is shortened. Uv paint is widely used by wood products manufacturers because of its good environmental protection, chemical resistance, physical damage resistance, high hardness and fast drying characteristics. Therefore, uv decorative panels are very popular with decoration companies. How did the UV wood based panels  come out? Today, Guangzhou Huayuan Wood Industry will give you a detailed explanation. UV paint is a transparent paint, also known as UV varnish. Its function is to transform the substrate surface from liquid to solid after spraying or roller coating on the substrate surface under the irradiation of UV lamp, so as to achieve surface hardening and play the role of scratch resistance. The surface looks bright, beautiful and round.

UV paint spraying process: UV primer → UV curing → sanding → UV finish → infrared leveling → UV drying → material receiving.

The traditional furniture paint “polyurethane paint (PU paint), unsatisfied polyester paint (PE paint) and nitrocellulose paint (NC paint)” has been increasingly marginalized in the modern furniture processing process due to its own limitations, such as: 1. The production time is slow, and it needs to be dried naturally after each coat of paint, which consumes both labor and time and takes up a lot of space. 2. During the construction of polyurethane paint (PU paint), unsaturated polyester paint (PE paint) and nitrocellulose paint (NC paint), nearly half of the solvents (such as toluene, xylene, ketone, ester, styrene) and free monomers (such as TDI) volatilize into the air, polluting the environment and endangering human health. Because of this, more and more people are not choosing to engage in this industry, leading to a huge increase in labor costs for this type of work and it is not necessarily possible to find skilled personnel. 3. Because the personal skills of the paint spraying personnel are completely required to master the product quality during the processing, the effect of the finished product cannot be completely controlled by the production enterprise. 4. Now, under the increasingly strict supervision of the state on environmental protection, due to the volatilization of harmful substances in the production process, many factories with residents nearby have been complained and asked by the Environmental Protection Bureau to stop production for rectification, which is the life and death of small and medium-sized enterprises. 5. In the end, all the reasons lead to a problem that its production cost is far higher than the production cost of UV paint, which must be the most important problem in the production of modern enterprises. The solid content of high-quality UV paint is more than 95%, and there is no volatilization of organic solvent during use. All the ingredients contained in the paint are solidified into a film. The health hazards to construction operators and environmental pollution are the lowest, and it is a real green environmental protection product. On July 1, 2003, the state enforced that the content of free (TDI) in PU mixed solution should be lower than 0.7%. This is because the substance is easy to gather after being inhaled into the human body, affecting the nervous system, reproductive system and digestive system. The use of UV paint also caters to this standard. Because of the above reasons, the application of UV paint in the furniture industry has entered a stage of rapid development. Large furniture manufacturers in Guangdong, Chengdu and Shanghai have basically started to use or are preparing to use UV paint. Although the price of UV paint products is higher than similar products in developed countries such as Europe, America and Japan, they are very popular and sell well. The competition in the furniture industry in the past two years is not as cruel as the price war in electrical appliances and other industries, but it is also increasingly fierce. Therefore, only by reducing cost and improving quality and ensuring environmental protection and reliability of products can we win in the fierce competition. Although the production cost of UV paint is lower than that of traditional paint, due to the high investment in fixed assets of UV production line, it is also difficult for some small and medium-sized enterprises to bear. Our company took the opportunity to introduce and build an advanced international quality UV paint production line to meet the processing needs of UV wood based panels . In the past two years, Guangdong environmental protection departments have been strict in investigating and punishing, and many furniture factories and wooden door factories have been stopped from production by the environmental protection bureau because the environmental protection of the paint spraying room is not up to the standard. This is undoubtedly a heavy blow to many small processing enterprises. Because of its better environmental protection performance, the uv paint production line has once again demonstrated its charm in this massive environmental remediation action. I believe that in the near future, uv wood based panels  will enter a new stage of development.

Leave a Reply

Your email address will not be published. Required fields are marked *