The four major standards for measuring the quality of MDF for furniture veneered wood-based panels cannot be ignored!
Introduction: Furniture veneer plywood MDF is a surface material used for interior decoration or furniture manufacturing, which is made by cutting natural wood or technological wood into thin pieces of a certain thickness, adhering to the surface of the plywood MDF, and then hot pressing. Furniture veneer plywood MDF is a surface material used for interior decoration or furniture manufacturing, which is made by cutting natural wood or technological wood into thin pieces of a certain thickness, adhering to the surface of the plywood MDF, and then hot pressing. How to judge the quality of veneer based plywood MDF? Next, let’s take a look at the four major standards for measuring MDF of wood-based panel plywood for furniture veneers.
The thicker the skin thickness, the better its durability. Especially after painting, the wood feels stronger, the texture is clearer, and the color is more vivid and saturated. Among them, the identification method for the thickness of the thin sheet is to observe whether the MDF edge of the wood-based plywood has sand penetration and glue penetration, and whether there are any phenomena such as cyanosis and bottom penetration after the water coating test. If the above problems exist, the skin is usually thin.
- Aesthetic and Decorative Properties of MDF Faces of Wood-based Panel Plywood. Based on the investigation of MDF Faces of Wood-based Panel Plywood, the MDF Faces of Wood-based Panel Plywood with clear texture, regular layout, aesthetic appearance, and coordinated color and lustre are preferred. Those with inconsistent color, irregular color differences that are detrimental to aesthetics, and even discoloration or blackening, should be reduced to first class or qualified products depending on their severity.
Manufacturing Process The inspection of manufacturing process can be judged from several aspects, such as slice planing, splicing and re bonding, seam processing, defect repair process, sanding defects, MDF defects in bottom wood-based panel plywood, and other external damage and pollution.
4-bottom wood-based panel plywood MDF material A look at the weight of the bottom wood-based panel plywood MDF, the heavy ones are mostly made of willow eucalyptus or other hard miscellaneous wood, and the light ones are made of poplar wood; The MDF color of the medium wood-based panel plywood is very uniform, and the white or medium wood-based panel MDF that has been dyed and masked is generally poplar wood; Third, check whether the wood-based plywood MDF is warped or deformed, and whether it can be vertically erected. If it is naturally laid flat and warped, or if the wood-based plywood MDF is soft and cannot be erected, it is considered a poor quality bottom wood-based plywood MDF.
