Several common furniture connection methods
Guide: As we all know, furniture is mostly a product composed of parts. Since it is a combination, it will involve connection mode and connection structure.
As we all know, furniture is mostly a product composed of parts. Since it is a combination, it will involve connection mode and connection structure. As for the connection of furniture, such as the soul of traditional furniture — mortise and tenon, and the skeleton of modern panel furniture — three in one connector. In addition, there are nail joint, glue joint, etc.
1、 The mortise and tenon structure is commonly used in ancient Chinese wooden buildings. This structure is also commonly used in the production of furniture, such as the simplest wooden small square stool, which is characterized by the use of mortise and tenon to reinforce objects without nails, reflecting the ancient Chinese culture and wisdom. A mortise hole in wood. For example, the mortise and tenon (referring to the joint of two parts); Mortise or mortise. “Where every piece of wood is joined together, it is called a bamboo shoot if it is empty. It is called a mortise if it is empty. Therefore, there is a common saying of bamboo shoot head mortise. The mortise and tenon structures are roughly classified into shoulder tenon, overlord tenon, collet tenon, shoulder tenon, brown corner tenon, mortise, wedge nail tenon, etc.
2、 Three in one connection Three in one connection, also known as fastener or combiner, is composed of eccentric wheel, rod and rubber particles. It is mainly used for the connection of panel furniture. It was invented by Haifule Furniture Fittings Company in the 1970s. Since their name “minifix” was registered as a patent, Heidisch also invented its own patented three in one connection, It is called “eccentric connector”. Therefore, the name of “eccentric connector” is adopted abroad. Since it was introduced into China in the 1980s, people have named it after the number of accessories: three in one connector, two in one connector, four in one connector and other connectors. Because the three in one connector is the most commonly used type, the three in one connector has become a synonym for eccentric connectors in China.
3、 Nail joint is a simple connection method, but its joint strength is low. It is generally used to connect non bearing structures or load-bearing structures with little force. Glue is often added on the joint surface to improve the joint strength. Nail joints are widely used in traditional handmade wooden furniture in China. Nails here do not simply refer to iron nails. They are usually made of metal, bamboo and wood, of which metal nails are the most widely used, and metal nails are commonly divided into round nails and air nails. The round nail joint is relatively simple, and it is often used in occasions where the strength requirement is not too high, the appearance is not affected, and the joint position is more secret. For example, it is used in the places where the backboard, drawer installation slideway, guide batten, etc. are not exposed and have low strength requirements.
