Resin-Form™ Film-Faced Formply iNSPECTION,TESTING,SOURCING

Bonding:
Phenolic resin glue line.

Surface:
Face and reverse: Brown phenolic film, Coatings 120 g/m2 (Standard) and 220 g/m2 (Optional)

Edge protection:
Acrylic-based paint.

Thicknesses and weights:

NOM. THICK/MMNO. OF PLIESMIN. THICK / MMMAX. THICK / MMWEIGHT / SHEET
12911.512.555 lbs
151114.315.370 lbs
191318.119.187 lbs
241722.923.7114 lbs
271925.226.8129 lbs

Moisture content 8-10%

Panel sizes:
4X8:  48”x96”
5X10: 60×120

Properties of panel surface:
The values are approximate and meant for guidance when choosing the film thicknesses.

Taber abrasion DIN 53799:
Coating 120 g/m2 300 rev’s
Coating 220 g/m2 600 rev’s
Improved water resistance through coating.
The coating is resistant to weak alkalis.
Direct exposure to sunlight may accelerate the aging and color alterations of the surface.
The coating thickness must be chosen according to the designed concrete quality, number of reuses and casting conditions.

Installation instructions:
Cover the panels to protect them from direct sunshine and rain.
Seal all cut edges.
Use good quality form oil.
Seal screw holes with silicone to reduce moisture absorption.|
Clean the panels carefully after every use.
Handle panels with care to get maximum reuse.

Leave a Reply

Your email address will not be published. Required fields are marked *