Manufacturing process and principle of Engineered  and technological wood veneer Introduction: Engineered  and technological wood veneer: refers to the recycled wood veneer, which is the “upgraded version” of natural wood. The raw materials used are logs, which are produced into Engineered  and technological bark after a series of design, dyeing, reconstruction, disinfestation treatment, high temperature and high pressure. There are …

Moisture content (%) Glue shear strength (in dry state) Adhesion of ply Glue shear strength(after 72 hrs. boiling) Tensile StrengthAlong the grainAcross the grain Sum strength Static bending strengthModulus of ruptureAlong the grainModulus of elasticityAlong the grainAcross the grain End Immersion Test Glue Adhesion Test Knife Test Impact Inclination Test Water resistant test Mycological test Modulus of elasticity Modulus of …

Baltic Birch Plywood Technical Specifications Face Grade Description Grade “B” Single piece veneer of light and uniform colour. A few small pin knots and some brown streaks are allowed. Veneer of this grade is intended for natural finishes. Patches are not allowed. The majority of Grade B veneers are the equivalent of the American “white birch” faces. Grade “BB” Single piece …