How to solve the problem of low bonding strength of plywood in China Plywood is a kind of building board that is often used by people. This kind of board is not cut from a large piece of wood, but is glued together by using adhesives. With the progress of technology and the strict requirements of plywood manufacturers, the service …
Read More »TimeLine Layout
November, 2022
-
6 November
Quality problems and solutions in plywood production in China，quality inspection checklist,quality control,quality assurance,sourcing specialist ,manufacturing consultant ,factory auditing
Quality problems and solutions in plywood production in China In the production process of any kind of product, there will be some quality problems. There are many and complex factors that affect the product quality, including the quality of raw materials, the insufficient precision of processing equipment, or the unreasonable processing technology arrangement. Of course, the other important reason is …
Read More » -
6 November
Defects of Chinese Plywood and Their Causes: Structural Defects and Appearance Defects，quality inspection checklist,quality control,quality assurance,sourcing specialist ,manufacturing consultant ,factory auditing
Defects of Chinese Plywood and Their Causes: Structural Defects and Appearance Defects Glue strength defect Low bonding strength The bonding strength of plywood is lower than the specified value of the standard. The reason is that the quality of adhesive is poor; The hot pressing conditions are not well controlled, such as low hot pressing temperature, insufficient pressure or short …
Read More » -
6 November
Analysis and quality Control of Common Quality Defects of Plywood in China，quality inspection checklist,quality control,quality assurance,sourcing specialist ,manufacturing consultant ,factory auditing
Analysis and Control of Common Quality Defects of Plywood in China At present, China is a big plywood exporter and the largest plywood producer in the world. However, on the one hand, China’s plywood products are frequently squeezed by foreign trade barriers, on the other hand, they are impacted by international advanced productive forces, facing huge challenges and threats from …
Read More » -
6 November
Why is the plywood warpping or twisting after veneer?,quality inspection checklist,quality control,quality assurance,sourcing specialist ,manufacturing consultant ,factory auditing
1、 Twisiting or Warpping caused by water content difference in some internal areas. In the production of plywood, for example, the chips of particle board and the fibers of medium density fiberboard are not evenly dried in some areas, or are not evenly distributed in the whole process of glue application. The veneer coating is not symmetrical in plywood production. There …
Read More » -
5 November
PLYWOOD BRACING Inspection checklist,quality control,quality assurance,factory auditing ,sourcing specialist
A product made especially for the structural bracing of houses. It is made with an ‘A’ bond glue line. Plywood Bracing is suitable for use in wall and roof bracing applications. Using bracing in timber framed buildings affords designers the opportunity to incorporate large openings and areas of glass in external walls or additional wall strength for cyclonic areas. Made from …
Read More » -
5 November
Plywood Bracing Test and inspection checklist
Bracing Test (Layout Below)• Walls were constructed using 90 x 45 MSG8 studs (600 centres), plates and nogs.• For 6.5mm and 7mm the plywood was fixed with 50 x 2.8 galvanised clouts at 150mm cen- tres around the perimeter and at 300mm centres in the middle.• For the 12mm Plywood 50 x 2.8mm Annular Grooved Stainless steel fixings were used …
Read More » -
4 November
Do you really know about dyed veneer?
Guide: There are two kinds of wood veneer used for surface veneer of wooden furniture products, one is natural wood veneer, and the other is artificial dyed wood veneer. Natural bark is a kind of natural wood, which has natural texture and color without artificial modification; Dyed veneer is the veneer modified by artificial dyes. In order to make the …
Read More » -
4 November
Detailed explanation of wood-based panel veneer technology!
Guide: At present, the plastic films used for veneer of panel parts mainly include polyvinyl chloride (PVC), polyethylene (PVE), polypropylene (Alcorcell), polyester (PET) and polypropylene (PP). Veneer decoration is a very important process in the production of panel furniture. It can cover the defects of the material surface and improve the physical properties of the substrate. Veneer materials include veneer …
Read More » -
4 November
Quality control of veneer of wood-based panel furniture
Guide: Veneer furniture is one of the modern furniture. It is made of thin pieces of wood pasted on the furniture panel, making the furniture have the natural appearance of solid wood furniture. The veneering process makes the wood-based panel furniture have a beautiful and natural appearance, can cover the wood surface defects, and protect the furniture to a certain …
Read More »
