TimeLine Layout

January, 2023

  • 29 January

    Furnitur Surface Inspection,QC ,quality control ,test

    Our Furniture QC systems detect any damage, decor defects, and dimensional deviations on one side or both sides during the front panel and carcass production, with maximum speed and precision. http://www.furniturecabinetsdepot.com/

    Read More »
  • 29 January

    Flooring Surface Inspection,QC ,quality control ,test

    Our Flooring inspectors combine the surface and the edge inspection and are installed in any flooring productions, for laminate or LVT flooring or digitally printed surfaces for a wide variety of decors and structures. Optimized scanner modules ensure the best detection performance for each product. Our QC systems continuously monitor the quality of products and trigger alarms when defects are …

    Read More »
  • 29 January

    Plywood and MDF Surface Inspection,QC ,quality control ,test

    We are specialized in the safe detection of all defects on the raw board, before or after cutting and sanding, with the classification of defects based on their cause in the process. Our team are good at detecting any damage on the top and bottom of panels in short-cycle press lines reliably detect heat streaks, resin spots, duplicate imprints or …

    Read More »
  • 29 January

    Reconstituted & Engineered Wood Veneer INSPECTION CHECKLIST,GRADING RULES ,QC STANDARD

    Engineered wood veneers are also known as recomposed, reconstituted or manufactured wood veneers. Engineered wood is a re-manufactured product processed to achieve a specific pre-designed appearance. Each sheet sliced from a block will be consistent throughout. Engineered wood veneers are sliced from softer, rapidly growing renewable species. The veneer is dyed in vats, dried and glued together into various shaped …

    Read More »
  • 29 January

    Veneer Grading VENEER QUALITY GRANDING SYSTEM Inspection checklist,grading rules ,QC

    VENEER QUALITY GRANDING SYSTEM veneer grading system that ensures that our customers get the quality of veneer that is required for their particular specifications. The general guidelines* for our grading system are as follows: “A” grade – This is the lowest grade and would be used for requirements that allow for veneer “defects”. This would be such things as limited pin …

    Read More »
  • 29 January

    FANCY WOOD Veneer Cutting Methods INSPECTION ,QC GRADING RULES

    Veneer Cutting Methods Rotary Cut Veneers are peeled from a log like paper coming off a roll. This method produces large pieces of veneer with flat, random grain patterns. This is generally the least expensive cutting method, but rotary veneers can have a bland appearance and may vary widely in pattern or color. Ideal for: Projects where a low price …

    Read More »
  • 29 January

    fancy decorative wood Veneer Matching types,inspection,QC checklist,grading rules

    Veneer Matching Other than rotary cut whole piece faces, all veneers for full-sized panels must be assembled into large sheets or “spliced” together. How the veneer leaves are arranged is called veneer matching and will produce a specific pattern in the finished panel. Veneer matching should not be confused with panel matching which refers to the relationship between several panels …

    Read More »
  • 29 January

    Different WOOD FACE VENEER matching techniques are used for specific panel applications,inspection,QC checklist ,grading rules,standards

    Pleasing Match Veneers are selected for uniformity of color without regard to grain pattern. No sharp color contrast is allowed, but grain patterns may not match. Book Match This is the most common matching method in which alternating leaves of veneer are turned over like the pages of a book. The result is a pleasing symmetrical pattern of mirror images …

    Read More »
  • 28 January

    Put the interests of plywood, MDF and furniture customers first

    LINDA CUI, 32 years old, is a FILM FACED PLYWOOD quality inspector of Pizhou quality inspection team. Since she has been engaged in quality inspection, she has always put the interests of plywood and MDF as well as furniture customers first. She not only regards plywood, MDF and furniture customers as service objects, but also regards plywood, MDF and furniture …

    Read More »
  • 28 January

    2023 Special Topic :Formulate a complaint “two lines” to fully protect the rights and interests of plywood and MDF customers.

    2023 Special Topic :Formulate a complaint “two lines” to fully protect the rights and interests of plywood and MDF customers. “Plywood and MDF customer complaints can reflect the deficiencies of plywood and MDF suppliers and quality inspection teams. In order to improve the customer satisfaction of plywood and MDF, I think this is the significance of my work.” During the …

    Read More »