Principles to minimise potential problems with Class2 and Class 3 off form Surface FinishesPrinciple One: …

Grain Raising or Surface SwellingGrain raising is caused by moisture penetrating the phenolic surface film …

Staining in FormplyThe most common stains associated with formply are: Rust stainingTannin stainingPinking – free …

Do not use any new panels showing bow or twist out of the pack. Wheredistortion …

Wrap and Twist in FormplyAS 6669 provides a 30mm flatness limitation for formply sheets. To …

This technical note has been developed in response to market problems and failuresrelating to the …

Choosing your Plywood Formply is typically covered with an overlay paper to slow water absorption …

For years, judging the quality of the as-cast concrete was really a guessing game. Often …

Clean and apply release agents. Soon after removal, plywood forms should be inspected for wear, cleaned, and repaired, spot-primed, refinished

Timber Products is one of the world’s largest processors of hardwood veneer. Each sheet of …