Description It is a plywood made of birch wood veneers with increased fire resistance. Intended for use in exterior conditions (according to PN-EN 636), meets the requirements of bonding quality class 3 according to PN-EN 314-2. The product has been classified in the reaction to fire class B-s1, d0 according to PN-EN 13501-1. Basic data Types of plywood depending on …

Description This is the plywood with milled edges allowing to combine them using tongue-and-groove  or scarf-joint edge joining. It enables faster and more accurate assembly of sheets into a large segments creating flat working surface. It is mainly used in structures such as floors, walls, roofs and semi-trailers.

Description Plywood strips are produced from deciduous plywood (birch, alder, beech) of special structure where fibres in most of veneer sheets are parallel in relation to their length, while two or four veneer plies have cross-wise arrangement of fibre for stabilisation. They are produced on the base of urea-formaldehyde resin, for use in dry conditions (according to PN-EN 636), meeting …

Description A wood-based board, produced on the basis of phenol-formaldehyde resin as water resistant, for use in exterior conditions (according to PN-EN 636), meeting the requirements of 3 gluing class quality according to PN-EN 314-2, composed of glued plies of wood (outer and middle veneers), whereat the directions of fibre of adjacent plies are staggered by 90°. The aluminium core …

Description It is a pine or combined pine plywood impregnated by dipping by wood preservatives agent. This product protects the plywood surface against wood destroying and wood discolouring fungi and satisfies the performance requirements of EN 599-1. Treated parts must always be protected with a topcoat treatment before they are exposed to the influence of the weather. Upon customer request …

Description A plywood foliated with a melamine film is wood-based board composed of glued with phenol-formaldehyde resin, or other of similar properties, plies of wood (outer and middle veneers), whereat the directions of fibre of adjacent plies are staggered by 90°. There are various types of plywood by wood species: Birch – birch plywood 100% Beech – beech plywood 100% Birch, alder, …

Description A plywood foliated with a phenol film is wood-based board of improved properties (resistance to water, sanding through) composed of glued plies of wood (outer and middle veneers), whereat the directions of fibre of adjacent plies are staggered by 90°. There are various types of plywood by wood species: Birch – birch plywood 100% Beech – beech plywood 100% …

Description A wood-based board composed of glued plies of wood (outer and middle veneers), whereat the directions of fibre of adjacent plies are staggered by 90°, and all plies (outer and middle veneers) are made of birch. Plywood with highly improved build quality, without any openings of veneers, splits, black and loose knots, knot holes both on the surface and …

Description A sound damping panel is composed of two sheets of deciduous (birch and alder wood) water-resistant (phenolformaldehyde resin) plywood, between which there is inserted sound and vibration damping material (damping lining and rubber-cork). In case of improved surface, one of plywood sheets is additionally covered with a phenol film (160g/m2 ) protecting against moist. Basic data Standard sizes: 2440 x …

03.10.2024 The Commission proposes an additional delay for the implementation of the EUDR 03.10.2024 The European Commission recently announced a legislative proposal to extend the implementation of Regulation No. 2023/1115 against deforestation and forest degradation (EUDR) by 12 months. If approved by the European Parliament and Council, the law would come into effect on December 30, 2025, for large companies …