Professional Wood Based Panels Sourcing and Inspection alliance and Association .A quality inspection and Sourcing team worthy of your trust and reliance. Since 2003,19+ Years Experience in Logs,Lumber ,Plywood,Plywood Components ,Outdoor and Indoor Furniture( Kitchen Cabinets,Wardrobes,Saunas ,Bathroom Vanities Cabinets ,Sofa ,Doors,Windows,Furniture Components ),Engineered wood flooring ,Hardware Building Materials,MDF,OSB,Particle Board,LVL,Blockboard ,Melamine Paper,HPL laminates,Sourcing,factory auditing,quality assurance,quality control and inspection.Email us at info@plywoodinspection.com,http://www.plywoodinspection.com/wechat : …
Read More »Classic Layout
(BS) EN 14279 : 2004 + A1: 2009 (confirmed 2014) Laminated Veneer Lumber (LVL) – Definitions, classification and specifications,inspection,testing,sourcing,factory auditing, Determination
(BS) EN 14279 : 2004 + A1: 2009 (confirmed 2014) Laminated Veneer Lumber (LVL) – Definitions, classification and specifications This standard gives definitions, a classification and specifies the requirements for LVL for general purposes or for use in construction in dry, humid or exterior conditions. It is referenced in the European harmonised standard for wood-based panel products EN 13986. LVL is …
Read More »(BS) EN 350:2016 Durability of wood and wood-based products – Testing and classification of the durability to biological agents of wood and wood-based materials,inspection,testing,sourcing,factory auditing, Determination
(BS) EN 350:2016 Durability of wood and wood-based products – Testing and classification of the durability to biological agents of wood and wood-based materials Note: This new standard replaces EN 350-1 and EN 350-2 which have now been combined into one document. It gives guidance on methods for determining and classifying the durability of wood and wood-based materials against biological …
Read More »(BS) EN 335:2013 (2018) Durability of wood and wood-based products – Definitions of use classes,inspection,testing,sourcing,factory auditing, Determination
(BS) EN 335:2013 Durability of wood and wood-based products – Use classes: definitions, application to solid wood and wood-based products The new EN 335:2013 combines EN 335-3:1995; EN 335-1:2006 and EN 335-2:2006. It gives general definitions of Use Classes for different service situations and is relevant to solid timber and wood-based products. It gives information on the biological agents that …
Read More »(BS) EN 326-2:2010+A1:2014 Initial type testing and factory production control,inspection,testing,sourcing,factory auditing, Determination
(BS) EN 326-2:2010+A1:2014 Methods for internal initial type testing, initial factory production control and external control of wood-based panels to ensure they comply with the harmonised standard EN 13986 are all contained in this part of the standard. The manufacturer has the option of applying the same criteria for applications other than construction. Amendment 1 (A1) was added in 2014 to meet …
Read More »(BS) EN 326-1:1994 (2002) Wood-based panels – Sampling and cutting of test pieces and inspection,inspection,testing,sourcing,factory auditing, Determination
(BS) EN 326-1: 1994 (confirmed 2014) Wood-based Panels – Sampling and cutting of test pieces and inspection (Specific information on the cutting of test pieces and the expression of test results are available in clauses 6 & 7 of EN 324-1). Panel properties for testing by EN 326 Panel Property EN Standard Panel TypeMoisture contentEN 322Plywood, OSB, LVLDimensional movementEN 318Plywood, OSB, LVLDensityEN …
Read More »(BS) EN 324-2:1993 (2002) Determination of squareness and edge straightness,inspection,testing,sourcing,factory auditing, Determination
(BS) EN 324-2: 1993 Wood-based Panels – Determination of squareness and edge straightness Part 2 specifies methods for measuring the squareness and edge straightness of wood-based panels. It applies to whole flat boards. Squareness Use a mechanical square having two arms each 1000mm (±1mm) length fixed at right angles to one another. Place one side of the square against one …
Read More »(BS) EN 324-1:1993 (2002) Wood-based panels – Determination of dimension of boards Determination of thickness, width and length,inspection,testing,sourcing,factory auditing, Determination
(BS) EN 324 -1: 1993 Wood-based Panels – Determination of thickness, width and length Part 1 gives methods for measuring the thickness, width and length of wood-based panels. It applies to whole flat boards. Thickness A micrometer or similar measuring instrument having flat, parallel measuring surfaces of 16mm (± 1) diameter and an operating force of 4N (± 1) and …
Read More »(BS) EN 323:1993 (2002) Wood-based panels – Determination of density,inspection,testing,sourcing,factory auditing, Determination
(BS) EN 323 : 1993 Wood-based panels – Determination of density This specifies a method for determining the density of test pieces of wood-based panels. These results may be used to estimate the density of wood-based panels according to EN 326 -1 : Wood-based panels – Sampling, cutting and inspection – Sampling and cutting of test pieces and expression of test …
Read More »(BS) EN 318:2002 Wood-based panels – Determination of dimensional changes associated with changes in relative humidity,inspection,testing,sourcing,factory auditing, Determination
(BS) EN 318 : 2002 Wood-based panels – Determination of dimensional changes associated with changes in relative humidity This specifies a method for determining dimensional changes in wood-based panels due to changes in the relative humidity of the air. This is measured between 65% relative humidity and 85% relative humidity in adsorption and 65% relative humidity and 30% relative humidity in …
Read More »