Malaysian Hardwood PlyManufactured from mixed hardwood veneers throughout. Malaysian Hardwood Ply CE2+ is a versatile product that combines an attractive surface appearance with superior performance under hazardous conditions. Malaysian Hardwood Ply CE2+ is suitable for interior and exterior use (in exterior use protect as recommended by TRADA). It has comparatively high strength to weight. It is manufactured from mixed hardwood …

This plywood is perfect for General Construction, Surface Finishing, Formwork/Shuttering, Packaging/Transport, and Joinery/Carpentry/Upholstered Furniture. It is 120 grit sanded. the back face is 100 Grit saned. Tropical replacement Plywood (TRP) is an excellent substitute for tropical plywood in most applications. TRP Faces are 3mm Thick whereas most faces of Tropical plywood have faces of less than 0.5mm and all plys …

An Okoume throughout plywood panel with selected cores and in compliance with the British norm BS 1088-1:2003 Lloyd’s Register Type Approved, Marine ply is recommended for nautical construction and boat furnishings. It has a wonderful lightness and an excellent resistance to damp conditions (Class 3 gluing) which enables the product to meet the specific demands of naval construction.It can also …

A multi-purpose hardwood plywood that is a versatile product which combines an attractive surface appearance with superior performance under hazardous conditions. A good indicator of a quailty plywoods cores is its durabilty, Our Marine plywoods have a density of 700kgs per M3. It has comparatively high strength to weight ratio.Construction Marine 1088 Ply CE2+ is suitable for interior and exterior …

Antislip facing for site scaffolding boards Thicknessmm211815129Standard format up tomm2500 x 1250SurfacePhenolic resin coatingone side 120 g/m² embossed,one side 120 g/m² smoothWeight kg/m²14.712.810.58.46.3Core constructionGlued birch plywoodNo. of plies15131197

For secondary formwork Concrete surfaces with low requirements Packaging units of 45 pieces Thicknessmm21Standard format up tomm2500 x 1250SurfacePhenolic resin coating 120 g/m² (both sides)Weightkg/m211.2Core constructionGlued poplar plywoodNo. of plies13 / 15

Plywood is a material manufactured from thin layers or “plies” of wood veneer that are glued together with adjacent layers. The most common type of commercial plywood is used in a multitude of general-purpose applications, reaching from furniture manufacturing, interior decoration, container floors, packing materials.The core of the materials is dependent on the sourcing country and the local timber species available.   Uses of Film-Face …

Polyester Lamination : White, Blue, Pink, Wood Grain (Custom)Glossy Finishing / Matte Finishing Base Panel : FalcataMLH Thickness : 2.7 / 3.6 / 5.2 / 18 MM Size : 4’ x 8’ Glue  : Type II

Polyester Faced Plywood Polyester Plywood is a work of art, from the mixture of compounds to the end product. It is all painstakingly created, step by step to give you a perfect product. Each piece of polyester plywood goes through a process of application of polyester resin, rolling, spreading of the polyester resin, curing and finally cutting. Polyester coating makes …

Technical Information Plywood is made by coating a layer of unsaturated polyester resin over the panel. Unsaturated polyester resin in its original solid form carries all the advantages of being scratch, heat, water and chemical resistant. It is a lightweight coating material that can withstand extreme changes in temperature. Textures including matt, gloss and embossed. These products are advantageous over …