Furniture Quality Inspection Report
Product Category: Wardrobe (Built-in/Free-standing)
Country of Origin: China
Target Market: Australia
Inspection Date: [Insert Date]
Inspection Standards:
- AS/NZS 2096:2014 (Furniture โ Storage units โ Safety requirements)
- AS/NZS 4935:2018 (Domestic furniture โ Assessment of surface resistance to abrasion)
- ISO 16983:2016 (Strength, durability, and safety of furniture)
- Australian Consumer Law (ACL) requirements
1. Product Description
- Model Number: [Insert]
- Dimensions: [Insert]
- Materials:
- Frame: Particleboard (E1 grade, formaldehyde emission โค0.1 ppm)
- Surface: Laminated finish (color: [Insert])
- Hardware: Adjustable hinges, drawer slides (brand: [Insert])
- Packaging: Corrugated cardboard with foam protectors and moisture-resistant film.
2. Inspection Summary
2.1 Structural Safety
- Stability Test: Passed (AS/NZS 2096). Unit remained upright under 50kg vertical load.
- Sharp Edges/Corners: No sharp edges detected; edges rounded (radius โฅ2mm).
- Hinge/Drawer Strength:
- Hinges withstood 50,000 open/close cycles (no deformation).
- Drawer slides tested for 25kg load capacity (no failure).
2.2 Material Quality
- Particleboard Density: 650 kg/mยณ (meets E1 standard).
- Surface Abrasion Resistance: Class 4 (AS/NZS 4935: 1,500 cycles, no visible wear).
- Coating Adhesion: Passed cross-cut test (ISO 2409: rating 0).
2.3 Functional Testing
- Door Alignment: Gaps โค2mm across all doors.
- Drawer Functionality: Smooth operation, no jamming.
- Shelving Load Test: 30kg static load for 24h (no deflection).
2.4 Packaging & Labeling
- Shipping Carton Drop Test: Passed 1m drop (no damage to product).
- Labels: Compliant with Australian requirements:
- Country of origin (“Made in China”) clearly marked.
- Assembly instructions included (English).
- Warning label: “Not suitable for children under 3 years.”
2.5 Chemical Compliance
- Formaldehyde Emission: 0.08 ppm (below Australiaโs 0.1 ppm limit).
- Lead/Cadmium Content: Paint tested <90 ppm (compliant with ACL).
3. Non-Conformities
- Minor Issue: One unit had slight color variation (within acceptable tolerance per batch standards).
- Resolution: Affected unit quarantined; production process adjusted for color consistency.
4. Conclusion
The inspected wardrobe meets all structural, safety, and chemical requirements for the Australian market. Recommended for shipment upon correction of minor color inconsistencies.
Inspector: [Name/Signature]
Approval: [Quality Manager/Signature]
Company Stamp: [Insert]
Note: This report is valid for 12 months. Retest required for material or design changes.
ๅฆ้่ฟไธๆญฅ่ฐๆดๆ่กฅๅ ็ป่๏ผ่ฏท้ๆถๅ็ฅ๏ผ
