Furniture Quality Inspection Report
Product Category: Cabinets (Kitchen/Storage)
Country of Origin: China
Target Market: Australia
Inspection Date: [Insert Date]
Inspection Standards:
- AS/NZS 2096:2014 (Furniture โ Storage units โ Safety requirements)
- AS/NZS 4935:2018 (Domestic furniture โ Surface abrasion resistance)
- ISO 17072:2020 (Furniture โ Strength and durability of doors and drawers)
- Australian Consumer Law (ACL) (Product safety and labeling requirements)
- AS/NZS 4386.1:2017 (Kitchen assemblies โ Performance requirements)
1. Product Description
- Model Number: [Insert]
- Dimensions: [Insert]
- Materials:
- Frame: Medium-density fiberboard (MDF) with E1-grade formaldehyde emission (โค0.1 ppm).
- Surface: Thermofoil laminate (color: [Insert]), scratch-resistant finish.
- Countertop (if applicable): 18mm thick engineered stone (quartz composite).
- Hardware: Soft-close hinges, ball-bearing drawer slides (brand: [Insert]).
- Packaging: Reinforced corrugated cardboard with edge protectors and moisture barrier.
2. Inspection Summary
2.1 Structural Safety
- Load-Bearing Capacity:
- Wall-mounted cabinets passed 50kg static load test (AS/NZS 4386.1).
- Base cabinets supported 100kg distributed weight without deformation.
- Stability: Free-standing units met anti-tip requirements (AS/NZS 2096).
- Sharp Edges: All edges radius โฅ2mm; compliant with child safety standards.
2.2 Material Quality
- MDF Density: 750 kg/mยณ (exceeds E1 standard).
- Surface Resistance:
- Abrasion: Class 4 (AS/NZS 4935: 1,500 cycles, no visible wear).
- Heat Resistance: No discoloration after 30-minute exposure to 80ยฐC (tested on countertop).
- Moisture Resistance:** 24-hour water exposure test โ no swelling or delamination.
- Coating Adhesion: Cross-cut test passed (ISO 2409: rating 0).
2.3 Functional Testing
- Door/Drawer Operation:
- Hinges withstood 60,000 open/close cycles (ISO 17072).
- Drawer slides tested for 30kg dynamic load (no failure).
- Alignment:
- Door gaps โค1.5mm; drawer fronts aligned within 1mm tolerance.
- Countertop Strength:
- 250kg point load applied (no cracks; compliant with AS/NZS 4386.1).
2.4 Packaging & Labeling
- Drop Test: Passed 0.8m drop on all corners (no structural damage).
- Label Compliance:
- “Made in China” clearly printed on packaging.
- Warning labels: “Use wall anchors for wall-mounted units.”
- Assembly manual included (English/Spanish).
2.5 Chemical Compliance
- Formaldehyde Emission: 0.07 ppm (below Australiaโs 0.1 ppm limit).
- VOCs (Paints/Adhesives): <50 ยตg/mยณ (compliant with ACL).
3. Non-Conformities
- Minor Issue: Slight unevenness in one drawer slide (0.5mm misalignment).
- Resolution: Adjusted slide alignment; re-inspected batch confirmed compliance.
4. Conclusion
The inspected cabinets meet all Australian safety, durability, and chemical regulations. Recommended for export pending final packaging verification.
Inspector: [Name/Signature]
Approval: [Quality Manager/Signature]
Company Stamp: [Insert]
Note: This report is valid for 12 months. Retest required for design/material changes.
ๅฆ้่ฐๆดๆต่ฏๅๆฐใๆทปๅ ๅ ทไฝๅๅทๆ่กฅๅ ๅ ถไป็ป่๏ผ่ฏท้ๆถๅ็ฅ๏ผ
