Film Coated paper for film faced plywood
Paper that can be bonded to each other on the surface of wood-based panels.
Impregnated adhesive paper (commonly known as coated paper) is a kind of adhesive paper that is impregnated with amino resin (mainly melamine resin) or phenolic resin and dried to a certain degree of curing.
catalogue
1 Application field
2 Specification of Film Coated paper for film faced plywood
Reasons for lamination of Film Coated paper for film faced plywood
application area
This type of adhesive impregnated paper can be bonded to each other or overlaid on the surface of wood-based panels by hot pressing.
Laminated paper is widely used in the production of building templates. Laminated paper and wood-based panels are thermally pressed to produce building templates, which are beautiful and have obvious advantages: making the surface of the building membrane board smooth and smooth; The membrane plate will not cause any pollution to the building; It can strictly limit the discharge amount of harmful gases; Wear resistance and compression resistance; The waterproof paint greatly extends the service life of the membrane plate.
The coated paper is divided into black coated paper and brown coated paper, and the laminated board produced from it enables the formwork to be repeatedly constructed inside and outside the building. The phenolic resin film attached to its surface has the characteristics of abrasion resistance, corrosion resistance, and compression resistance. The surface is flat, smooth, and easy to use, thereby avoiding secondary plastering, greatly shortening the construction period. This kind of membrane covered plate is widely used in shear walls, dams, tunnels, etc. It has a broad development prospect.
Specification of Film Coated paper for film faced plywood
1、 40kg × 1270MM × 800m
2、 1270mm wide (effective width: 1250mm, 4 feet wide) or 970mm wide (effective width: 950mm, 3 feet wide) X extended meter
3、 1270 mm wide (effective width: 1250 mm, 4 feet wide) or 970 mm wide (effective width: 950 mm, 3 feet wide) X elongated meter construction template paper, black, brown, etc.
4、 1270 mm wide (effective width: 1250 mm, 4 feet wide) or 970 mm wide (effective width: 950 mm, 3 feet wide) X elongated meter construction template paper, black, brown, etc.
5、 1270mm wide (effective width: 1250mm, 4 feet wide) or 970mm wide (effective width: 950mm, 3 feet wide) X extended meters.
6、 1270mm wide (effective width: 1250mm, 4 feet wide) or 970mm wide (effective width: 950mm, 3 feet wide) X extended meters.
7、 1530mm wide (effective width is 1510mm)
Reasons for lamination of Film Coated paper for film faced plywood
1、 The reason may be that the original paper is recycled paper and the paper itself is not good, so the dipping process is uneven and does not penetrate, resulting in delamination. In addition, during hot pressing, it is not pressed into one piece, resulting in lamination of the membrane paper during mold removal or use.
2、 It may also be due to low temperature during hot pressing of the template, poor adhesion of the membrane paper, and delamination.
3、 The film paper does not dip well when it is dipped, which affects the adhesive uniformity of the paper itself, leading to delamination.
