Edge Bending quality standard of wood based panels furniture should keep pace with the times
Nowadays, the society pays more and more attention to the concept of green environmental protection, and the furniture industry is no exception. With the improvement of the production and application of wood based panels furniture in China, the types of edge bonding materials for wood based panels furniture gradually show diversity and individuality. China has begun to implement the “Technical Requirements for Edge Bonding Strips for Furniture”, but the standards for edge bonding quality are not clearly defined. Only the good quality of the edge banding strip is not enough to reflect the high-quality edge banding effect. The edge banding strip needs to be highly matched with the plate, thus effectively improving the edge banding quality and efficiency. Check from the source, strict standards, and achieve the development trend of overall high-quality edge Bending.
The surface of high-quality edge Bending effect shall be free of dry flowers, wet flowers, cracks, wrinkles, creases, dark streaks, natural defects of wood (dead knots, wormholes, holes, skin inclusions, decay), dyeing lines, knife lines, oil laps, stains, black spots, viscoses, impurities, obvious bubbles, pinholes, scratches, ripples and other defects, the surface shall be smooth, and the patterns shall be clear, uniform, and free of omission; The embossed (embossed) surface should have a uniform pattern, and the embossing should be clear without obvious color difference; The connecting edge between the wood based panels and the edge banding strip shall be free of defects, edge collapse, delamination and opening cracks, and shall be smooth and straight, close to the overall product effect of integrated molding.