Comparison between PET wood based panels and UV wood based panels
Guide: The base materials for PET and UV panels are mainly density wood based panels s. Of course, the base materials can also be multilayer wood based panels s and chipwood based panels s. In contrast, the surface flatness of density wood based panels s is higher than that of solid wood multilayer wood based panels s and chipwood based panels s. Therefore, density wood based panels s are commonly used as the base materials for PET and UV panels.
With the development and application of modern material technology and chemical technology, new materials and new chemical reagents are used more and more widely in the furniture industry.
Recently, in the furniture industry, a new type of panel decorative material – PET door panel is popular.
Faced with the door panel made of this new material, people in the industry do not know how to start for a moment, how its application effect in the furniture field is, and what is the difference between it and the UV door panel that has been widely used in the furniture industry. When making furniture, whether to choose PET door panel or UV door panel? In daily life, PET is not unfamiliar to us. It is widely used in textile, paper making, food machinery, transportation, wharf, medical, coal mine, chemical and other industries. PET plastic and PET film are all familiar materials. The bottles, plastic wrap, edible oil packaging of mineral water we often drink are made of PET materials. PET plate is the abbreviation of Polyester terephthalate, which is called PET plate or PET plate for short. Polyterephthalic acid plastic, referred to as polyester plate. Its components mainly include polyethylene terephthalate (PET) and polybutylene terephthalate (PBT). PET sheet is mainly printed on the surface of the sheet and then pasted with a layer of PET film, because the PET film is transparent and colorless. Therefore, the design and color of PET sheet mainly depends on the color of decorative paper on the surface of the sheet. The surface hardness of PET film can generally reach 2H, the scratch resistance is good, and the PET film has a certain toughness, so it is not easy to collapse edges during the blanking and cutting process. PET is a composite material with good sliding property, abrasion resistance and high adhesion. Therefore, it is not easy to cross cut and peel the plate during processing, and the bonding place can withstand high temperature and strong hardness. Of course, if the pressure between the PET film and the substrate is uneven or the adhesive quality is poor, there will also be adhesion problems and bulges on the surface of the plate in the later period. At the same time, PET door panels also have the disadvantages of high cost and difficult modeling.
UV wood based panels
UV wood based panels is a wood based panels whose surface is treated and protected by UV paint. UV paint is UV curing paint, also known as light bow | hair paint. The wood based panels is formed by applying UV paint on particlewood based panels , density wood based panels and other wood based panels s, and then drying them with UV curing machine. In the current environmental protection situation, as an environmental protection material, UV paint has developed very fast in recent years, with high solid content, low volatile matter, high production efficiency and stable quality. It is a mature industrial product in the current decoration market! At present, the surface hardness of UV plate is generally between 2H and 3H, and the hardness of UV plate can also reach 4H to 5H, but it is not suitable for customized door panels in the whole house. Because the hardness is too high, edge collapse will occur during blanking. UV wood based panels has high surface smoothness, bright color, and is not easy to fade, with strong visual impact; Environmental protection, high brightness, wear resistance, aging resistance, easy to clean. However, it has high cost, high requirements for mechanical equipment and process technology, poor moisture-proof performance, and is not easy to make modeling. It must be edge sealed. Once the edge is loose, it will affect the use. Comparison between PET wood based panels and UV wood based panels The base materials used for PET wood based panels and UV wood based panels are mainly density wood based panels s. Of course, the base materials can also be multilayer wood based panels s and chipwood based panels s. In contrast, the surface flatness of density wood based panels s is higher than that of solid wood multilayer wood based panels s and chipwood based panels s. Therefore, density wood based panels s are commonly used as the base materials for PET and UV wood based panels s. From the perspective of environmental protection, the density wood based panels s are mostly E1 grade materials, and there are few E0 grade materials on the market. Therefore, the environmental protection of using density wood based panels as the base material is inferior to that of solid wood multilayer wood based panels and particle wood based panels . In terms of flatness, the flatness of PET sheet is better than that of UV sheet. The main reason is that the flatness of UV sheet mainly depends on the flatness of the sheet. If the flatness of the substrate selected for the UV wood based panels is not high, the surface will collapse in the later period. From the side, the UV wood based panels will appear orange peel. This is mainly aimed at high gloss UV products, and matt products do not have high requirements on the flatness of the substrate. In terms of price, the background color of PET sheet and UV sheet is decorative paper, while the price of PET sheet is higher than that of UV sheet by about tens of yuan. Of course, if the UV wood based panels is pasted with wood veneer, the price of the wood based panels also depends on the price of the wood veneer itself. In terms of yellowing resistance, PET door panels and UV door panels have good yellowing resistance indicators.
In a word, both PET wood based panels s and UV wood based panels s have rich patterns and colors, high flatness, and high gloss (bright) and matt (skin feeling) in the form of expression. They are mainstream products that are more suitable for the application of simple, light and luxurious style customized by the whole house.
