Colored film-faced plywood is lightweight and resistant to corrosion attack and detergents. This material is simple to process and can easily be combined with other materials. Colored film-faced plywood is mainly used in high temperature drop conditions, in areas with moisture and is therefore a great material for open conditions.
Colored film-faced plywood is made of Northern wood which ensures the durability of the panel whereas damage resistance is ensured by high-quality import film coats on the panel. Highly water-and wear resistant colored film-faced plywood is achieved by painting the edges of the plywood with waterproof paint and film-facing it.
All of the above mentioned qualities of colored film-faced plywood make this material excellent to use in many different areas.
The film-faced panels water-and-wear resistant surface makes it a good material to use for stadiums, event constructions, children playgrounds. Since colored film-faced plywood is water-and-wear resistant, ecologically safe and resistant to detergents this material finds good use in packing manufacture.
As the name colored film-faced plywood says there are many different colors that this material comes in. Therefore it is highly appreciated also by the furniture industry. This material finds use in furniture manufacturing, interior decoration and so on.
Specification
according to TU 5512-002-44769167-98
Dimensions, mm2440 х 1220, 1220 x 2440, 2500 х 1250, 1250 x 2500Thickness, mm6.5, 9.0, 12.0, 15.0, 18.0, 21.0, 24.0, 27.0, 30.0Tolerance on length (width)+/- 2mmGrade of face veneer1, 1/2, 2Number of pliesfrom 5 up to 21 depending on thicknessSurface colorin assortmentEdges processingby waterproof acrylic paintBasisbirch plywoodFormaldehyde emission classE1 (up to 8 mg per 100g of bone dry plywood)Water resistanceWBP markMoisture content, max5-12 %Ultimate shearing strengthnot less 1.5 MPa (birch base), not less 1.0 MPa (KOMBI base)Ultimate tensile strengthnot less 40 MPaUltimate creasing strengthnot less 60 MPaCertificationDIN 68705-3, EN 13986, EN 636-3, Russian hygienic certificate (WBP only), Russian standard GOST
Poor physical performance The hot pressing temperature is low or the hot pressing time is short, the resin curing is incomplete, and the surface of the melamine paper is easy to stick dust during use, which is difficult to clean and forms a dirty surface. The hot pressing temperature is too high, the hot pressing plates surface temperature is uneven or the …
Causes and Prevention Measures of Plywood Bubbling in China In the plywood production process, hot pressing is a very important process, which is an important process to finalize the product. It is irreversible. Once quality problems occur, especially bubble will bring great losses to the company. Therefore, it is necessary to understand and master the causes and prevention methods of …
Defects easily occurred during hot pressing of plywood in China and solutions 1、 Bubbling and partial delamination Causes: 1. The moisture content of veneer is too high or the drying is uneven 2. Too much glue 3. The pressure drop speed is too fast or the hot pressing temperature is too high 4. Insufficient resin condensation 5. Insufficient hot pressing …
Bubbling, delamination , warping, common problems of plywood hot pressing in China 1、 Bubbling and partial delamination Causes: 1. The moisture content of veneer is too high or the drying is uneven 2. Too much glue 3. The pressure drop speed is too fast or the hot pressing temperature is too high 4. Insufficient resin condensation 5. Insufficient hot pressing …
How to solve the problem of low bonding strength of plywood in China Plywood is a kind of building board that is often used by people. This kind of board is not cut from a large piece of wood, but is glued together by using adhesives. With the progress of technology and the strict requirements of plywood manufacturers, the service …
Quality problems and solutions in plywood production in China In the production process of any kind of product, there will be some quality problems. There are many and complex factors that affect the product quality, including the quality of raw materials, the insufficient precision of processing equipment, or the unreasonable processing technology arrangement. Of course, the other important reason is …
Defects of Chinese Plywood and Their Causes: Structural Defects and Appearance Defects Glue strength defect Low bonding strength The bonding strength of plywood is lower than the specified value of the standard. The reason is that the quality of adhesive is poor; The hot pressing conditions are not well controlled, such as low hot pressing temperature, insufficient pressure or short …
Analysis and Control of Common Quality Defects of Plywood in China At present, China is a big plywood exporter and the largest plywood producer in the world. However, on the one hand, China’s plywood products are frequently squeezed by foreign trade barriers, on the other hand, they are impacted by international advanced productive forces, facing huge challenges and threats from …
Technical Parameters of Ultralam Note: For the production of special batches of Ultralam LVL with high-grade veneer layers (according to the specification), design strength values can be increased by 15 – 20%. CONDITION RELATIVE TO THE GRAIN Rb Rs R X I 23,5 22,5 22 3,8 1,7 16,5 — 2,6 1,1 edgewise along the …
