Colored film-faced plywood is lightweight and resistant to corrosion attack and detergents. This material is simple to process and can easily be combined with other materials. Colored film-faced plywood is mainly used in high temperature drop conditions, in areas with moisture and is therefore a great material for open conditions.
Colored film-faced plywood is made of Northern wood which ensures the durability of the panel whereas damage resistance is ensured by high-quality import film coats on the panel. Highly water-and wear resistant colored film-faced plywood is achieved by painting the edges of the plywood with waterproof paint and film-facing it.
All of the above mentioned qualities of colored film-faced plywood make this material excellent to use in many different areas.
The film-faced panels water-and-wear resistant surface makes it a good material to use for stadiums, event constructions, children playgrounds. Since colored film-faced plywood is water-and-wear resistant, ecologically safe and resistant to detergents this material finds good use in packing manufacture.
As the name colored film-faced plywood says there are many different colors that this material comes in. Therefore it is highly appreciated also by the furniture industry. This material finds use in furniture manufacturing, interior decoration and so on.
Specification
according to TU 5512-002-44769167-98
Dimensions, mm2440 х 1220, 1220 x 2440, 2500 х 1250, 1250 x 2500Thickness, mm6.5, 9.0, 12.0, 15.0, 18.0, 21.0, 24.0, 27.0, 30.0Tolerance on length (width)+/- 2mmGrade of face veneer1, 1/2, 2Number of pliesfrom 5 up to 21 depending on thicknessSurface colorin assortmentEdges processingby waterproof acrylic paintBasisbirch plywoodFormaldehyde emission classE1 (up to 8 mg per 100g of bone dry plywood)Water resistanceWBP markMoisture content, max5-12 %Ultimate shearing strengthnot less 1.5 MPa (birch base), not less 1.0 MPa (KOMBI base)Ultimate tensile strengthnot less 40 MPaUltimate creasing strengthnot less 60 MPaCertificationDIN 68705-3, EN 13986, EN 636-3, Russian hygienic certificate (WBP only), Russian standard GOST
Description A plywood foliated with a phenol film is wood-based board of improved properties (resistance to water, sanding through) composed of glued plies of wood (outer and middle veneers), whereat the directions of fibre of adjacent plies are staggered by 90°. There are various types of plywood by wood species: Birch – birch plywood 100% Beech – beech plywood 100% …
Description A wood-based board composed of glued plies of wood (outer and middle veneers), whereat the directions of fibre of adjacent plies are staggered by 90°, and all plies (outer and middle veneers) are made of birch. Plywood with highly improved build quality, without any openings of veneers, splits, black and loose knots, knot holes both on the surface and …
Description A sound damping panel is composed of two sheets of deciduous (birch and alder wood) water-resistant (phenolformaldehyde resin) plywood, between which there is inserted sound and vibration damping material (damping lining and rubber-cork). In case of improved surface, one of plywood sheets is additionally covered with a phenol film (160g/m2 ) protecting against moist. Basic data Standard sizes: 2440 x …
03.10.2024 The Commission proposes an additional delay for the implementation of the EUDR 03.10.2024 The European Commission recently announced a legislative proposal to extend the implementation of Regulation No. 2023/1115 against deforestation and forest degradation (EUDR) by 12 months. If approved by the European Parliament and Council, the law would come into effect on December 30, 2025, for large companies …
As far as I know, several giant PLYWOOD exporters in China have basically prepared various documents required by EUDR. Even if everything is ready, they are still very worried about whether the documents they prepare can meet the requirements of EUDR, because no one has experience in operating EUDR. Recently, many importers from Germany, Poland, France, the United Kingdom, the …
Description White Melamine Plywood with Birch Interior 1250X2400 mm is a material composed of several thin layers of plywood. The outer layer is coated with white melamine, which provides a smooth, scratch, heat and chemical resistant surface. White melamine is known for its glossy finish and clean appearance, making it ideal for a variety of applications, including furniture, shelving, cabinetry and …
DESCRIPTION Exterior Birch Plywood is a high-quality construction material with high durability and moisture resistance. Exterior Birch Plywood maintains its performance characteristics under conditions of high humidity and does not deform or soak. It can be used in both interior and exterior finish. CHARACTERISTICS Plywood grade is marked by face and back veneer quality (face/back): В/ВB (I/II) BB/BB (II/II) BB/CP …
Film faced plywood is a material with particularly good water resistance characteristics. Waterproof glue is used for gluing plywood veneer layers. Durability and water resistance are added to the material by a special layer of phenolic coating, which covers surface of plywood sheet on both sides. This coating provides effective protection of the material against moisture and mechanical damage. Plywood …
PlywoodBIRCH NATURAL Birch wood is among the species with excellent technical and visual characteristics for use in the furniture industry. This is the reason the birch plywood to be preffered for furniture production, used for natural engineered flooring, boats, exterior furnishing, unlimited design possibilities as well. The input veneer is thin, panels are easy to work with and are with …
