Colored film-faced plywood is lightweight and resistant to corrosion attack and detergents. This material is simple to process and can easily be combined with other materials. Colored film-faced plywood is mainly used in high temperature drop conditions, in areas with moisture and is therefore a great material for open conditions.
Colored film-faced plywood is made of Northern wood which ensures the durability of the panel whereas damage resistance is ensured by high-quality import film coats on the panel. Highly water-and wear resistant colored film-faced plywood is achieved by painting the edges of the plywood with waterproof paint and film-facing it.
All of the above mentioned qualities of colored film-faced plywood make this material excellent to use in many different areas.
The film-faced panels water-and-wear resistant surface makes it a good material to use for stadiums, event constructions, children playgrounds. Since colored film-faced plywood is water-and-wear resistant, ecologically safe and resistant to detergents this material finds good use in packing manufacture.
As the name colored film-faced plywood says there are many different colors that this material comes in. Therefore it is highly appreciated also by the furniture industry. This material finds use in furniture manufacturing, interior decoration and so on.
Specification
according to TU 5512-002-44769167-98
Dimensions, mm2440 х 1220, 1220 x 2440, 2500 х 1250, 1250 x 2500Thickness, mm6.5, 9.0, 12.0, 15.0, 18.0, 21.0, 24.0, 27.0, 30.0Tolerance on length (width)+/- 2mmGrade of face veneer1, 1/2, 2Number of pliesfrom 5 up to 21 depending on thicknessSurface colorin assortmentEdges processingby waterproof acrylic paintBasisbirch plywoodFormaldehyde emission classE1 (up to 8 mg per 100g of bone dry plywood)Water resistanceWBP markMoisture content, max5-12 %Ultimate shearing strengthnot less 1.5 MPa (birch base), not less 1.0 MPa (KOMBI base)Ultimate tensile strengthnot less 40 MPaUltimate creasing strengthnot less 60 MPaCertificationDIN 68705-3, EN 13986, EN 636-3, Russian hygienic certificate (WBP only), Russian standard GOST
(BS) EN 350:2016 Durability of wood and wood-based products – Testing and classification of the durability to biological agents of wood and wood-based materials Note: This new standard replaces EN 350-1 and EN 350-2 which have now been combined into one document. It gives guidance on methods for determining and classifying the durability of wood and wood-based materials against biological …
(BS) EN 335:2013 Durability of wood and wood-based products – Use classes: definitions, application to solid wood and wood-based products The new EN 335:2013 combines EN 335-3:1995; EN 335-1:2006 and EN 335-2:2006. It gives general definitions of Use Classes for different service situations and is relevant to solid timber and wood-based products. It gives information on the biological agents that …
(BS) EN 326-2:2010+A1:2014 Methods for internal initial type testing, initial factory production control and external control of wood-based panels to ensure they comply with the harmonised standard EN 13986 are all contained in this part of the standard. The manufacturer has the option of applying the same criteria for applications other than construction. Amendment 1 (A1) was added in 2014 to meet …
(BS) EN 326-1: 1994 (confirmed 2014) Wood-based Panels – Sampling and cutting of test pieces and inspection (Specific information on the cutting of test pieces and the expression of test results are available in clauses 6 & 7 of EN 324-1). Panel properties for testing by EN 326 Panel Property EN Standard Panel TypeMoisture contentEN 322Plywood, OSB, LVLDimensional movementEN 318Plywood, OSB, LVLDensityEN …
(BS) EN 324-2: 1993 Wood-based Panels – Determination of squareness and edge straightness Part 2 specifies methods for measuring the squareness and edge straightness of wood-based panels. It applies to whole flat boards. Squareness Use a mechanical square having two arms each 1000mm (±1mm) length fixed at right angles to one another. Place one side of the square against one …
(BS) EN 324 -1: 1993 Wood-based Panels – Determination of thickness, width and length Part 1 gives methods for measuring the thickness, width and length of wood-based panels. It applies to whole flat boards. Thickness A micrometer or similar measuring instrument having flat, parallel measuring surfaces of 16mm (± 1) diameter and an operating force of 4N (± 1) and …
(BS) EN 323 : 1993 Wood-based panels – Determination of density This specifies a method for determining the density of test pieces of wood-based panels. These results may be used to estimate the density of wood-based panels according to EN 326 -1 : Wood-based panels – Sampling, cutting and inspection – Sampling and cutting of test pieces and expression of test …
(BS) EN 318 : 2002 Wood-based panels – Determination of dimensional changes associated with changes in relative humidity This specifies a method for determining dimensional changes in wood-based panels due to changes in the relative humidity of the air. This is measured between 65% relative humidity and 85% relative humidity in adsorption and 65% relative humidity and 30% relative humidity in …
(BS) EN 317 : 1993 Particleboards and fibreboards – Determination of swelling in thickness after immersion in water Despite its title, the standard is applicable to Oriented Strand Board. It specifies a method of determining the swelling in thickness of flat-pressed or drum-pressed particleboards including OSB. Swelling in thickness is determined by measuring the increase in thickness of the test piece …
(BS) EN 315 : 2000 (confirmed 2014) Plywood – Tolerances for dimensions This gives the dimensional tolerances of plywood panels (length, width and thickness) and tolerances for squareness and edge straightness at a moisture control of 10% (±2%). Moisture content is measured according to EN 322: Wood-based panels – Determination of moisture content. The method for measuring thickness, width and length …
