COLORED FILM FACED PLYWOOD

Colored film-faced plywood is lightweight and resistant to corrosion attack and detergents. This material is simple to process and can easily be combined with other materials. Colored film-faced plywood is mainly used in high temperature drop conditions, in areas with moisture and is therefore a great material for open conditions.

Colored film-faced plywood is made of Northern wood which ensures the durability of the panel whereas damage resistance is ensured by high-quality import film coats on the panel. Highly water-and wear resistant colored film-faced plywood is achieved by painting the edges of the plywood with waterproof paint and film-facing it.

All of the above mentioned qualities of colored film-faced plywood make this material excellent to use in many different areas.

The film-faced panels water-and-wear resistant surface makes it a good material to use for stadiums, event constructions, children playgrounds. Since colored film-faced plywood is water-and-wear resistant, ecologically safe and resistant to detergents this material finds good use in packing manufacture.

As the name colored film-faced plywood says there are many different colors that this material comes in. Therefore it is highly appreciated also by the furniture industry. This material finds use in furniture manufacturing, interior decoration and so on.

Specification

according to TU 5512-002-44769167-98

Dimensions, mm2440 х 1220, 1220 x 2440, 2500 х 1250, 1250 x 2500Thickness, mm6.5, 9.0, 12.0, 15.0, 18.0, 21.0, 24.0, 27.0, 30.0Tolerance on length (width)+/- 2mmGrade of face veneer1, 1/2, 2Number of pliesfrom 5 up to 21 depending on thicknessSurface colorin assortmentEdges processingby waterproof acrylic paintBasisbirch plywoodFormaldehyde emission classE1 (up to 8 mg per 100g of bone dry plywood)Water resistanceWBP markMoisture content, max5-12 %Ultimate shearing strengthnot less 1.5 MPa (birch base), not less 1.0 MPa (KOMBI base)Ultimate tensile strengthnot less 40 MPaUltimate creasing strengthnot less 60 MPaCertificationDIN 68705-3, EN 13986, EN 636-3, Russian hygienic certificate (WBP only), Russian standard GOST

FSC PEFC CARB EPA XUZHOU Radiata Pine Plywood Manufacturer China,Pine Larch Masson Radiata Plywood

admin Quality Control Inspection and Assurance 135

Professional Wood Based Panels Sourcing and Inspection alliance and Association .A quality inspection and Sourcing team worthy of your trust and reliance. Since 2003,19+ Years Experience in Logs,Lumber ,Plywood,Plywood Components ,Outdoor and Indoor Furniture( Kitchen Cabinets,Wardrobes,Saunas ,Bathroom Vanities Cabinets ,Sofa ,Doors,Windows,Furniture Components ),Engineered wood flooring ,Hardware Building Materials,MDF,OSB,Particle Board,LVL,Blockboard ,Melamine Paper,HPL laminates,Sourcing,factory auditing,quality assurance,quality control and inspection.Email us at info@plywoodinspection.com,http://www.plywoodinspection.com/wechat : …

China Pine Plywood manufacturers & suppliers CHINESE PINE-PLY C+/C CE2+ EXT/WBP Softwood Plywood

admin Quality Control Inspection and Assurance 157

(BS) EN 14279 : 2004 + A1: 2009 (confirmed 2014) Laminated Veneer Lumber (LVL) – Definitions, classification and specifications,inspection,testing,sourcing,factory auditing, Determination

admin Grading Rules, Performance Testing and Laboratory Test Request, Quality Control Inspection and Assurance, Quality Standards 507

(BS) EN 14279 : 2004 + A1: 2009 (confirmed 2014) Laminated Veneer Lumber (LVL) – Definitions, classification and specifications This standard gives definitions, a classification and specifies the requirements for LVL for general purposes or for use in construction in dry, humid or exterior conditions. It is referenced in the European harmonised standard for wood-based panel products EN 13986. LVL is …

(BS) EN 350:2016 Durability of wood and wood-based products – Testing and classification of the durability to biological agents of wood and wood-based materials,inspection,testing,sourcing,factory auditing, Determination

admin Grading Rules, Performance Testing and Laboratory Test Request, Quality Control Inspection and Assurance, Quality Standards 501

(BS) EN 350:2016 Durability of wood and wood-based products – Testing and classification of the durability to biological agents of wood and wood-based materials Note: This new standard replaces EN 350-1 and EN 350-2 which have now been combined into one document. It gives guidance on methods for determining and classifying the durability of wood and wood-based materials against biological …

(BS) EN 335:2013 (2018) Durability of wood and wood-based products – Definitions of use classes,inspection,testing,sourcing,factory auditing, Determination

admin Grading Rules, Performance Testing and Laboratory Test Request, Quality Control Inspection and Assurance, Quality Standards 440

(BS) EN 335:2013 Durability of wood and wood-based products – Use classes: definitions, application to solid wood and wood-based products The new EN 335:2013 combines EN 335-3:1995; EN 335-1:2006 and EN 335-2:2006. It gives general definitions of Use Classes for different service situations and is relevant to solid timber and wood-based products. It gives information on the biological agents that …

(BS) EN 326-2:2010+A1:2014 Initial type testing and factory production control,inspection,testing,sourcing,factory auditing, Determination

admin Grading Rules, Performance Testing and Laboratory Test Request, Quality Control Inspection and Assurance, Quality Standards 158

(BS) EN 326-2:2010+A1:2014 Methods for internal initial type testing, initial factory production control and external control of wood-based panels to ensure they comply with the harmonised standard EN 13986 are all contained in this part of the standard. The manufacturer has the option of applying the same criteria for applications other than construction. Amendment 1 (A1) was added in 2014 to meet …

(BS) EN 326-1:1994 (2002) Wood-based panels – Sampling and cutting of test pieces and inspection,inspection,testing,sourcing,factory auditing, Determination

admin Grading Rules, Performance Testing and Laboratory Test Request, Quality Control Inspection and Assurance, Quality Standards 400

(BS) EN 326-1: 1994 (confirmed 2014) Wood-based Panels – Sampling and cutting of test pieces and inspection (Specific information on the cutting of test pieces and the expression of test results are available in clauses 6 & 7 of EN 324-1). Panel properties for testing by EN 326 Panel Property EN Standard Panel TypeMoisture contentEN 322Plywood, OSB, LVLDimensional movementEN 318Plywood, OSB, LVLDensityEN …

(BS) EN 324-2:1993 (2002) Determination of squareness and edge straightness,inspection,testing,sourcing,factory auditing, Determination

admin Grading Rules, Performance Testing and Laboratory Test Request, Quality Control Inspection and Assurance, Quality Standards 200

(BS) EN 324-2: 1993 Wood-based Panels – Determination of squareness and edge straightness Part 2 specifies methods for measuring the squareness and edge straightness of wood-based panels. It applies to whole flat boards. Squareness Use a mechanical square having two arms each 1000mm (±1mm) length fixed at right angles to one another. Place one side of the square against one …

(BS) EN 324-1:1993 (2002) Wood-based panels – Determination of dimension of boards Determination of thickness, width and length,inspection,testing,sourcing,factory auditing, Determination

admin Grading Rules, Performance Testing and Laboratory Test Request, Quality Control Inspection and Assurance, Quality Standards 280

(BS) EN 324 -1: 1993 Wood-based Panels – Determination of thickness, width and length Part 1 gives methods for measuring the thickness, width and length of wood-based panels. It applies to whole flat boards. Thickness A micrometer or similar measuring instrument having flat, parallel measuring surfaces of 16mm (± 1) diameter and an operating force of 4N (± 1) and …

(BS) EN 323:1993 (2002) Wood-based panels – Determination of density,inspection,testing,sourcing,factory auditing, Determination

admin Grading Rules, Performance Testing and Laboratory Test Request, Quality Control Inspection and Assurance, Quality Standards 214

(BS) EN 323 : 1993 Wood-based panels – Determination of density This specifies a method for determining the density of test pieces of wood-based panels. These results may be used to estimate the density of wood-based panels according to EN 326 -1 : Wood-based panels – Sampling, cutting and inspection – Sampling and cutting of test pieces and expression of test …

Page 64 of 100« First...40 50 60 «62 636465 66 » 70 80 90...Last »