Colored film-faced plywood is lightweight and resistant to corrosion attack and detergents. This material is simple to process and can easily be combined with other materials. Colored film-faced plywood is mainly used in high temperature drop conditions, in areas with moisture and is therefore a great material for open conditions.
Colored film-faced plywood is made of Northern wood which ensures the durability of the panel whereas damage resistance is ensured by high-quality import film coats on the panel. Highly water-and wear resistant colored film-faced plywood is achieved by painting the edges of the plywood with waterproof paint and film-facing it.
All of the above mentioned qualities of colored film-faced plywood make this material excellent to use in many different areas.
The film-faced panels water-and-wear resistant surface makes it a good material to use for stadiums, event constructions, children playgrounds. Since colored film-faced plywood is water-and-wear resistant, ecologically safe and resistant to detergents this material finds good use in packing manufacture.
As the name colored film-faced plywood says there are many different colors that this material comes in. Therefore it is highly appreciated also by the furniture industry. This material finds use in furniture manufacturing, interior decoration and so on.
Specification
according to TU 5512-002-44769167-98
Dimensions, mm2440 х 1220, 1220 x 2440, 2500 х 1250, 1250 x 2500Thickness, mm6.5, 9.0, 12.0, 15.0, 18.0, 21.0, 24.0, 27.0, 30.0Tolerance on length (width)+/- 2mmGrade of face veneer1, 1/2, 2Number of pliesfrom 5 up to 21 depending on thicknessSurface colorin assortmentEdges processingby waterproof acrylic paintBasisbirch plywoodFormaldehyde emission classE1 (up to 8 mg per 100g of bone dry plywood)Water resistanceWBP markMoisture content, max5-12 %Ultimate shearing strengthnot less 1.5 MPa (birch base), not less 1.0 MPa (KOMBI base)Ultimate tensile strengthnot less 40 MPaUltimate creasing strengthnot less 60 MPaCertificationDIN 68705-3, EN 13986, EN 636-3, Russian hygienic certificate (WBP only), Russian standard GOST
Random inspection items and common quality defects of density fiberboard in November 2022 In this spot check of 80 batches of MDF products produced by 17 enterprises, 12 batches of MDF products were found to be unqualified, and the rate of unqualified products was 15%, 8.1 percentage points lower than the last spot check. The static bending strength, internal bonding …
Quality supervision and spot check of particle board products and common quality defects According to the requirements of such standards as Chipboard (GB/T 4897-2015) and Indoor Decoration Materials – Wood based Panels and Their Products – Limits of Formaldehyde Release (GB 18580-2017), spot checks were conducted on the water absorption thickness expansion rate, static bending strength, internal bonding strength, surface …
Random inspection of MDF product quality supervision and common quality defects Common spot checks are carried out according to the requirements of such standards as Medium Density Fiberboard (GB/T 11718-2009) and Indoor Decoration Materials – Wood based Panels and Their Products – Limits for Formaldehyde Release (GB 18580-2017). The water absorption thickness expansion rate, static bending strength, internal bonding strength, …
Medium density fiberboard, as the raw materials purchased are not strictly controlled, resulting in insufficient viscosity of the glue, which may break and delamination in use, posing a certain potential safety hazard to consumers.
Sampling Inspection Results of Plywood Product Quality in Vietnam in November 2022 In November 2022, the second batch of plywood products in the production field were inspected by supervision and random inspection, and no unqualified products were found. According to the requirements of GB/T 9846-2015 Plywood, GB 18580-2017 Limits of Formaldehyde Emission from Wood based Panels and Their Products as …
Proposal for Legal Inspection of Scaffolding plywood, The plywood for concrete-formBy the Bureau of Standards, Metrology and Inspection (BSMI), Ministry of Economic AffairsBackground:Scaffolding plywood, the plywood for concrete-form have been widely used as a kind ofbuilding materials these days. The public is concerned about pollution of indoor air byformaldehyde emitted from adhesive bonded wood products and demands restriction on the …
The difference is our service. The Panel division staff at Timber Products Inspection (TP) brings years of industry expertise and knowledge to our customers. We focus on in-plant quality and process controls to ensure that finished products meet industry recognized standards. Our clients participating in this program experience increased efficiency in production as well as fewer problems in the field. …
All Aluminum Plywood Decks are manufactured using high tensile, corrosion resistant aluminum, and feature corrugated work surface to increase traction. Wind latch securing system prevents uplift. The Aluminum Plywood Deck is a work platform that acts as a lightweight, extra wide plank. Technical SpecificationsWeight: *See Product Specifications SheetMaterial: Aluminum and plywoodCompatibility: Used with any modular scaffolding systems *For more information, …
