Colored film-faced plywood is lightweight and resistant to corrosion attack and detergents. This material is simple to process and can easily be combined with other materials. Colored film-faced plywood is mainly used in high temperature drop conditions, in areas with moisture and is therefore a great material for open conditions.
Colored film-faced plywood is made of Northern wood which ensures the durability of the panel whereas damage resistance is ensured by high-quality import film coats on the panel. Highly water-and wear resistant colored film-faced plywood is achieved by painting the edges of the plywood with waterproof paint and film-facing it.
All of the above mentioned qualities of colored film-faced plywood make this material excellent to use in many different areas.
The film-faced panels water-and-wear resistant surface makes it a good material to use for stadiums, event constructions, children playgrounds. Since colored film-faced plywood is water-and-wear resistant, ecologically safe and resistant to detergents this material finds good use in packing manufacture.
As the name colored film-faced plywood says there are many different colors that this material comes in. Therefore it is highly appreciated also by the furniture industry. This material finds use in furniture manufacturing, interior decoration and so on.
Specification
according to TU 5512-002-44769167-98
Dimensions, mm2440 х 1220, 1220 x 2440, 2500 х 1250, 1250 x 2500Thickness, mm6.5, 9.0, 12.0, 15.0, 18.0, 21.0, 24.0, 27.0, 30.0Tolerance on length (width)+/- 2mmGrade of face veneer1, 1/2, 2Number of pliesfrom 5 up to 21 depending on thicknessSurface colorin assortmentEdges processingby waterproof acrylic paintBasisbirch plywoodFormaldehyde emission classE1 (up to 8 mg per 100g of bone dry plywood)Water resistanceWBP markMoisture content, max5-12 %Ultimate shearing strengthnot less 1.5 MPa (birch base), not less 1.0 MPa (KOMBI base)Ultimate tensile strengthnot less 40 MPaUltimate creasing strengthnot less 60 MPaCertificationDIN 68705-3, EN 13986, EN 636-3, Russian hygienic certificate (WBP only), Russian standard GOST
Composition MDF can be manufactured with either softwood or hardwood species. The majority of MDF manufactured is composed mainly of softwood although some individual brands may contain a higher percentage of temperate hardwood depending on the location of the factory to the local forest resource.The constituents of a typical standard MDF manufactured in the United Kingdom or Ireland are 82% …
Composition and manufacturing process The timbers used in OSB manufacture include both softwoods (spruce, pine) and hardwood (aspen). Wood strands are cut tangentially from debarked logs which are held longitudinally against rotating knives. The ribbon of flakes produced is usually about 75mm wide and this breaks up on handling to produce individual flakes which are 75mm along the grain and …
Particleboard (‘Chipboard’) Composition Wood chips comprise the bulk of particleboard and are prepared in a mechanical chipper generally from coniferous softwoods principally spruce, though pine and fir and hardwoods, such as birch, are sometimes used. Particleboards may also incorporate a large proportion from recycled sources (up to 95% plus but generally around 40%). These chips are generally bound together with …
SWP/1 :Solid wood panel for use in dry conditionsSWP/2 :Solid wood panel for use in humid conditionsSWP/3 :Solid wood panel for use in exterior conditions
P1: general purpose boards for use in dry conditions.P2: boards for interior fitments (including furniture) for use in dry conditions.P3: non load-bearing boards for use in humid conditionsP4: load-bearing boards for use in dry conditions.P5: load-bearing boards for use in humid conditions.P6: heavy duty load-bearing boards for use in dry conditions.P7: heavy duty load-bearing boards for use in humid conditions.
EN 634-1 Cement-bonded particleboards – Specifications-Part 1: General requirements.EN 634-2 Cement-bonded particleboards – Specifications-Part 2: Requirements for OPC bonded particleboards for use in dry, humid and exterior conditions. MOE classes 1 & 2.
Wet Process Fibreboards Softboard (EN 622-4)General purpose (for use in dry conditions) SBGeneral purpose (for use in humid conditions) SB.HGeneral purpose (for use in exterior conditions) SB.E EN 622-4Load bearing (for use in dry conditions) SB.LSLoad bearing (for use in humid conditions) SB.HLSaLow density mediumboard (EN 622-3)General purpose (for use in dry conditions) MBLGeneral purpose (for use in humid conditions) …
