Colored film-faced plywood is lightweight and resistant to corrosion attack and detergents. This material is simple to process and can easily be combined with other materials. Colored film-faced plywood is mainly used in high temperature drop conditions, in areas with moisture and is therefore a great material for open conditions.
Colored film-faced plywood is made of Northern wood which ensures the durability of the panel whereas damage resistance is ensured by high-quality import film coats on the panel. Highly water-and wear resistant colored film-faced plywood is achieved by painting the edges of the plywood with waterproof paint and film-facing it.
All of the above mentioned qualities of colored film-faced plywood make this material excellent to use in many different areas.
The film-faced panels water-and-wear resistant surface makes it a good material to use for stadiums, event constructions, children playgrounds. Since colored film-faced plywood is water-and-wear resistant, ecologically safe and resistant to detergents this material finds good use in packing manufacture.
As the name colored film-faced plywood says there are many different colors that this material comes in. Therefore it is highly appreciated also by the furniture industry. This material finds use in furniture manufacturing, interior decoration and so on.
Specification
according to TU 5512-002-44769167-98
Dimensions, mm2440 х 1220, 1220 x 2440, 2500 х 1250, 1250 x 2500Thickness, mm6.5, 9.0, 12.0, 15.0, 18.0, 21.0, 24.0, 27.0, 30.0Tolerance on length (width)+/- 2mmGrade of face veneer1, 1/2, 2Number of pliesfrom 5 up to 21 depending on thicknessSurface colorin assortmentEdges processingby waterproof acrylic paintBasisbirch plywoodFormaldehyde emission classE1 (up to 8 mg per 100g of bone dry plywood)Water resistanceWBP markMoisture content, max5-12 %Ultimate shearing strengthnot less 1.5 MPa (birch base), not less 1.0 MPa (KOMBI base)Ultimate tensile strengthnot less 40 MPaUltimate creasing strengthnot less 60 MPaCertificationDIN 68705-3, EN 13986, EN 636-3, Russian hygienic certificate (WBP only), Russian standard GOST
Hardwood faced structural plywood is used in permanent structures where the board is likely to be used in humid or interior conditions. This high-grade structural panel is less prone to bending and twisting and, with its excellent strength to weight ratio, makes it versatile and easy to handle. Thickness3.6mmSize3050mm x 1220mmApplicationsFor use in floors, For use in roofs, For use …
COMBI is short for combination. Combi core is a mixture of poplar veneer and eucalyptus veneer. The combi plywood is a balance between poplar plywood and eucalyptus plywood. Size2440mm x 1220mmThickness3.6mmApplicationsFor use in floors, For use in roofs, For use in wallsBrand ClassBS-EN636 Class 2 (suitable for use in Class 1 & 2 humid interior or covered exterior application offering …
Our Malaysian structural plywood provides homeowners and merchants with a superior solution for interior and exterior applications using the highest quality tropical species. Remember to seal the sheets before using them externally ( i.e. exposed to weather conditions). Size2440mm x 1220mmThickness3.6mmApplicationsFor tiling, For use in floors, For use in wallsBrand ClassBS EN636 Class 3 (suitable for use in Class 1, …
It is excellent hardwood plywood engineered with waterproof glue. This plywood is not chemically treated; therefore, it is not resistant to rot. Marine plywood has good grades, are robust, lightweight and defect-free. Thickness25mmSize2440mm x 1220mmApplicationsMarine settingBrand ClassBS EN636 Class 3 (suitable for use in Class 1, 2 & 3 for structural applications for interior and exterior construction offering limited resistance …
“Jade 72” is an exterior grade, cost-effective, high-quality hardwood plywood, suitable for various applications. Created using weather and boil proof adhesive and hardwood throughout, this versatile plywood provides a good finish. It is ideal for outdoor use once sealed with a suitable coating or preservative Size2440mm x 1220mmThickness25mmApplicationsFor use in floors, For use in roofs, For use in wallsBrandQMarkClassBS EN636 …
Specification guidance When specifying wood based panels or indeed any product, a number of things need to be considered in that process. Not all that is considered will be relevant but all must be considered. In certain situations a precise specification is needed so that an appropriate material can be found to meet that specification. A good specification will ensure …
European panel standards & CE marking There are many different country specific and indeed international standardisation systems in operation. In Europe, the dominant standard is the Construction Products Directive (CPD). One of the easiest ways of complying with the Directive is through CE marking. A CE mark will also satisfy the material requirements of Building Regulations, there are however other …
Marine plywood to BS 1088 2003 is manufactured using timbers having a durability rating of Class 3 (moderately durable) or better in accordance with EN 350-2. Exceptionally, low density species such as gaboon, with a durability rating of Class 4 (slightly durable) or better may also be used. In both cases, high quality veneers are used and must be bonded …
As necessary with all structural wood based panels, plywood like any other has to be fit for the intended end use in terms of the testing that has been carried out and / or claims made for that end use. This applies to both the specification and the purchasing of plywood. A structural plywood is denoted by an ‘S’ after …
Composition & manufacture Veneer plywood Standard plywood veneer is still produced using a lathe, which peels a log in a similar manner to a blade pencil sharpener. Most decorative veneer is sliced from flitches after the log is cut into quarters. Small strips of veneer may be jointed into full-size sheets by edge gluing, stitching or using perforated paper adhesive …
