Colored film-faced plywood is lightweight and resistant to corrosion attack and detergents. This material is simple to process and can easily be combined with other materials. Colored film-faced plywood is mainly used in high temperature drop conditions, in areas with moisture and is therefore a great material for open conditions.
Colored film-faced plywood is made of Northern wood which ensures the durability of the panel whereas damage resistance is ensured by high-quality import film coats on the panel. Highly water-and wear resistant colored film-faced plywood is achieved by painting the edges of the plywood with waterproof paint and film-facing it.
All of the above mentioned qualities of colored film-faced plywood make this material excellent to use in many different areas.
The film-faced panels water-and-wear resistant surface makes it a good material to use for stadiums, event constructions, children playgrounds. Since colored film-faced plywood is water-and-wear resistant, ecologically safe and resistant to detergents this material finds good use in packing manufacture.
As the name colored film-faced plywood says there are many different colors that this material comes in. Therefore it is highly appreciated also by the furniture industry. This material finds use in furniture manufacturing, interior decoration and so on.
Specification
according to TU 5512-002-44769167-98
Dimensions, mm2440 х 1220, 1220 x 2440, 2500 х 1250, 1250 x 2500Thickness, mm6.5, 9.0, 12.0, 15.0, 18.0, 21.0, 24.0, 27.0, 30.0Tolerance on length (width)+/- 2mmGrade of face veneer1, 1/2, 2Number of pliesfrom 5 up to 21 depending on thicknessSurface colorin assortmentEdges processingby waterproof acrylic paintBasisbirch plywoodFormaldehyde emission classE1 (up to 8 mg per 100g of bone dry plywood)Water resistanceWBP markMoisture content, max5-12 %Ultimate shearing strengthnot less 1.5 MPa (birch base), not less 1.0 MPa (KOMBI base)Ultimate tensile strengthnot less 40 MPaUltimate creasing strengthnot less 60 MPaCertificationDIN 68705-3, EN 13986, EN 636-3, Russian hygienic certificate (WBP only), Russian standard GOST
COLLECTIONSCHOOSE FROM 8 COLLECTIONS OF HARDWOOD FLOORING, FOR A COMPLETELY DIFFERENT LOOKSMOOTHTransform your home with elegant Smooth prefinished Hardwood Flooring by Vintage. Our hardwood has unmatched quality, beauty and durability. With the smallest micro-v bevel in the industry, Vintage’s smooth floors are easier to keep clean and looking beautiful for years. With several species, grades, widths and colors to choose …
There are positives and negatives to both finished and unfinished floors. When considering which is best for your home, you should understand the procedure involved and that it may leave residual scents that linger in the air when having a floor finished in the home. The waiting time for the finish to cure is also an aspect to think about. …
The Difference Between Hardwood Flooring, Laminate Flooring & Engineered Hardwood Not everyone is a flooring expert, and making a decision between hardwood, laminate, and engineered flooring can be confusing. Grand Floors is here to end that unrest and put a stop to the confusion. Hardwood flooring is created from a single plank of wood and is appropriate for installation in any …
A total of 20 batches of plywood products from 6 enterprises in the province were sampled. Two batches of products from six enterprises were found not to meet the requirements of relevant standards, and the unqualified items were adhesive strength and elastic modulus. According to the requirements of GB 18580-2017 “Limit of formaldehyde emission from wood-based panels and their products …
The results of “double random” special supervision and random inspection on the quality of wood-based panel products in January 2023. After inspection, three batches of products were found to be unqualified, and the unqualified detection rate was 15.3%. This time, 15 batches of wood-based plywood and MDF products produced by 11 enterprises were inspected. The unqualified items include “water absorption …
This time, 15 batches of wood-based plywood and MDF products produced by 5 enterprises were inspected. After inspection, three batches of products produced by two enterprises were found to be unqualified, and the detection rate of unqualified products was 42.0%. This spot check is based on GB 18580-2001 Limit of Formaldehyde Emission from Indoor Decorative and Decorative Materials, Wood-based Panels …
