Colored film-faced plywood is lightweight and resistant to corrosion attack and detergents. This material is simple to process and can easily be combined with other materials. Colored film-faced plywood is mainly used in high temperature drop conditions, in areas with moisture and is therefore a great material for open conditions.
Colored film-faced plywood is made of Northern wood which ensures the durability of the panel whereas damage resistance is ensured by high-quality import film coats on the panel. Highly water-and wear resistant colored film-faced plywood is achieved by painting the edges of the plywood with waterproof paint and film-facing it.
All of the above mentioned qualities of colored film-faced plywood make this material excellent to use in many different areas.
The film-faced panels water-and-wear resistant surface makes it a good material to use for stadiums, event constructions, children playgrounds. Since colored film-faced plywood is water-and-wear resistant, ecologically safe and resistant to detergents this material finds good use in packing manufacture.
As the name colored film-faced plywood says there are many different colors that this material comes in. Therefore it is highly appreciated also by the furniture industry. This material finds use in furniture manufacturing, interior decoration and so on.
Specification
according to TU 5512-002-44769167-98
Dimensions, mm2440 х 1220, 1220 x 2440, 2500 х 1250, 1250 x 2500Thickness, mm6.5, 9.0, 12.0, 15.0, 18.0, 21.0, 24.0, 27.0, 30.0Tolerance on length (width)+/- 2mmGrade of face veneer1, 1/2, 2Number of pliesfrom 5 up to 21 depending on thicknessSurface colorin assortmentEdges processingby waterproof acrylic paintBasisbirch plywoodFormaldehyde emission classE1 (up to 8 mg per 100g of bone dry plywood)Water resistanceWBP markMoisture content, max5-12 %Ultimate shearing strengthnot less 1.5 MPa (birch base), not less 1.0 MPa (KOMBI base)Ultimate tensile strengthnot less 40 MPaUltimate creasing strengthnot less 60 MPaCertificationDIN 68705-3, EN 13986, EN 636-3, Russian hygienic certificate (WBP only), Russian standard GOST
British far-infrared sauna customers who established business relations during the epidemic in 2020 plan to visit Xuzhou, China, at the end of March to negotiate deeper and longer cooperation with sauna suppliers in Xuzhou, whom they have not met for three years. In the past three years, they have become an indispensable long-term stable customer of the factory from the …
Is it too irresponsible for the plywood and MDF inspection agency to mark “only responsible for the sample”? In many plywood and MDF inspection reports, there is a statement of “only responsible for the sample”, especially when the plywood and MDF inspection reports have qualified conclusions. Some consumers (organizations) don’t understand. They think that plywood and MDF inspection agencies can’t …
(a) Field Testing of Plywood You can check the plywood quality on the site, by performing some basic tests, which are called as a field test, i.e. Thickness of Plywood Sheets: A thickness of plywood sheets remains same all throughout the sheet. For finding any variation present in thickness, measure the four edges of the ply. Undulation of Plywood Sheets …
(BS) EN 314-1: 2004 (confirmed 2014) Plywood – Bond quality – Test methods This standard specifies methods for determining the bonding quality of veneer plywood, by shear testing. Before carrying out the shear tests the plywood samples are required to undergo a sequence of pre-treatments e.g. section 5.14 calls for immersion for 72 hours (±1) in boiling water followed by …
Requirement Estonian Plywood (part of the Lemeks/Tarmeko group) is a leading manufacturer of uncoated birch plywood; harvested from sustainable well-managed forests. Their years of expertise in raw materials, preparation and plywood construction has seen them build an unrivalled reputation for delivering cross-bonded birch veneers with outstanding strength properties. Plywood, which is made with glues and resins that bond thin plies …
How Much Weight Can Plywood Hold? Plywood Strength Chart, Load Calculator The first question that comes to mind for many who purchase plywood is, how much weight can plywood hold? This is mainly because plywood, although it’s very sustainable, doesn’t look like much at first glance. However, looks are deceiving in this case, because plywood is a lot stronger than …
Plywood Performance Testing Requirements https://apawood-europe.org/official-guidelines-3/apa-plywood-main-eu-standards/performance-characteristics-en-636/ The UK and Europe adhere to the same standards for wood-based panels. The standard that classifies plywood is (BS) EN 636 and the overall harmonised (EU) or designated (UK) standard for wood-based panels is (BS) EN 13986: 2004+A1 2015. Here’s a quick guide in table and list form, giving the relevant clauses and tables in this overall standard. The Clause number …
Guidelines Official Guidelines Find Your StandardList of Individual StandardsUpdates: Standards & RegulationsMoisture Content: Use & Service Classes(BS) EN 300: 2019(BS) CEN/TR 14823 : 2003(BS) EN 12114 : 2000(BS) EN 12664(BS) EN 310(BS) EN 354:2003(BS) EN 383: 2007(BS) EN ISO 12572:2016(BS) EN 313-1(BS) EN 313-2(BS) EN 314-1(BS) EN 314-2(BS) EN 315(BS) EN 317(BS) EN 318(BS) EN 319(BS) EN 321(BS) EN 322(BS) …
(BS) EN 636:2012+A1:2015 Plywood – Specification This gives the requirements for plywood for general purpose use and for structural (load bearing) applications in dry, humid and exterior conditions. It also gives a classification based on bending properties. Amendment 1 : 2015 makes the following modifications to EN 636 : 2012 a) The scope now clarifies that the standard includes overlaid …
Many exporters and manufacturers can’t distinguish or understand the specific quality requirements of (BS) EN 314-2. Let’s explain again. This part of the standard specifies the requirements for bonding classes of veneer plywood according to their end uses. It lists three classes of bond quality. Bond Class 1: Dry conditions ‒ interior applications with no risk of wetting. This is equivalent to a …
