Colored film-faced plywood is lightweight and resistant to corrosion attack and detergents. This material is simple to process and can easily be combined with other materials. Colored film-faced plywood is mainly used in high temperature drop conditions, in areas with moisture and is therefore a great material for open conditions.
Colored film-faced plywood is made of Northern wood which ensures the durability of the panel whereas damage resistance is ensured by high-quality import film coats on the panel. Highly water-and wear resistant colored film-faced plywood is achieved by painting the edges of the plywood with waterproof paint and film-facing it.
All of the above mentioned qualities of colored film-faced plywood make this material excellent to use in many different areas.
The film-faced panels water-and-wear resistant surface makes it a good material to use for stadiums, event constructions, children playgrounds. Since colored film-faced plywood is water-and-wear resistant, ecologically safe and resistant to detergents this material finds good use in packing manufacture.
As the name colored film-faced plywood says there are many different colors that this material comes in. Therefore it is highly appreciated also by the furniture industry. This material finds use in furniture manufacturing, interior decoration and so on.
Specification
according to TU 5512-002-44769167-98
Dimensions, mm2440 х 1220, 1220 x 2440, 2500 х 1250, 1250 x 2500Thickness, mm6.5, 9.0, 12.0, 15.0, 18.0, 21.0, 24.0, 27.0, 30.0Tolerance on length (width)+/- 2mmGrade of face veneer1, 1/2, 2Number of pliesfrom 5 up to 21 depending on thicknessSurface colorin assortmentEdges processingby waterproof acrylic paintBasisbirch plywoodFormaldehyde emission classE1 (up to 8 mg per 100g of bone dry plywood)Water resistanceWBP markMoisture content, max5-12 %Ultimate shearing strengthnot less 1.5 MPa (birch base), not less 1.0 MPa (KOMBI base)Ultimate tensile strengthnot less 40 MPaUltimate creasing strengthnot less 60 MPaCertificationDIN 68705-3, EN 13986, EN 636-3, Russian hygienic certificate (WBP only), Russian standard GOST
The National Timber Standardization Technical Committee has three sub technical committees: Basic Standards, Log, and Sawn Timber. Release date: April 28, 2023 The National Timber Standardization Technical Committee was established in August 1984 with the approval of the National Standardization Commission, consisting of three sub technical committees: Basic Standards, Log, and Sawn Timber. Mainly responsible for organizing the formulation, revision, …
GB/T17657-2013 Test Method for Physical and Chemical Properties of Wood-based Panels and Decorative Wood-based Panels: Determination of Bond Strength 17 Determination of bonding strength 17.1 Principle To determine the bonding quality of single-panel artificial boards by causing shear failure of the adhesive layer of the specimen under tensile load 17.2 Instruments and equipment 17.2.1 Universal mechanical test, select an appropriate …
GB/T17657-2013 Test Method for Physical and Chemical Properties of Wood-based Panels and Decorative Wood-based Panels: Determination of Moisture Resistance – Boiling Water Boiling Test Determination of moisture resistance – boiling water boiling test 13.1 Principle Determine the internal bonding strength of the specimen after boiling in water. Artificial board universal testing machine. png 13.2 Instruments and equipment 13.2.1 Universal mechanical …
GB/T17657-2013 Test Method for Physical and Chemical Properties of Wood-based Panels and Decorative Wood-based Panels: Determination of Internal Bonding (Bonding) Strength after 2-hour Boiling in Water Determination of internal bonding strength after boiling in 12 2h water 12.1 Principle Determine the internal bonding strength of the specimen after boiling in water 12.2 Instruments and equipment 12.2.1 Universal mechanical testing machine …
GB/T17657-2013 Test Method for Physical and Chemical Properties of Artificial Board and Decorative Artificial Board: Determination of Internal Bonding (Bonding) Strength. 11 Determination of internal bonding strength 11.1 Principle The internal bonding strength is a measurement of the tensile strength of the specimen surface to withstand uniformly distributed tensile force until failure. The internal bonding strength is the ratio of …
GB/T17657-2013 Test Method for Physical and Chemical Properties of Wood-based Panels and Decorative Wood-based Panels: Determination of Static Bending Strength and Elastic Modulus (Three Point Bending) Determination of static bending strength and elastic modulus (three-point bending) 7.1 Principle The static bending strength and elastic modulus of three-point bending are measured by applying a load to the middle of the specimen …
Detect the bending moment and flexural modulus ratio of artificial decorative panel panels under maximum load. Three point bending test steps for artificial decorative panels: Make the test piece according to the test requirements: Size and length of the test piece: (thickness of the test piece) × 20+50）mm； Width b=(50 ± 1) mm. For hollow structural plates with tube holes …
GB/T17657-2013 Test Method for Physical and Chemical Properties of Wood-based Panels and Decorative Wood-based Panels: Determination of Peel Resistance 20 Determination of peel resistance 20.1 Principle Determine the force required to peel off the surface layer. This method is applicable to PVC film veneer artificial board. 20.2 Instruments Universal mechanical testing machine, with a load range of 0 N-500 N. …
GB/T17657-2013 Test Methods for Physical and Chemical Properties of Wood based Panels and Decorative Wood based Panels: Determination of shear strength of Adhesive Layer 18 Determination of shear strength of adhesive layer 18.1 Principle Gradually apply compressive load to the specimen to cause shear failure of the adhesive layer, in order to determine the bonding quality. 18.2 Instruments and equipment …
GB/T17657-2013 Test Method for Physical and Chemical Properties of Wood-based Panels and Decorative Wood-based Panels: Determination of Impregnation Peeling Performance 19 Determination of immersion stripping performance 19.1 Principle Determine whether the adhesive layer of the test piece has peeled off and the degree of peeling after immersion and drying. This method is applicable to single-board artificial boards. 19.2 Instruments 19.2.1 …
