Colored film-faced plywood is lightweight and resistant to corrosion attack and detergents. This material is simple to process and can easily be combined with other materials. Colored film-faced plywood is mainly used in high temperature drop conditions, in areas with moisture and is therefore a great material for open conditions.
Colored film-faced plywood is made of Northern wood which ensures the durability of the panel whereas damage resistance is ensured by high-quality import film coats on the panel. Highly water-and wear resistant colored film-faced plywood is achieved by painting the edges of the plywood with waterproof paint and film-facing it.
All of the above mentioned qualities of colored film-faced plywood make this material excellent to use in many different areas.
The film-faced panels water-and-wear resistant surface makes it a good material to use for stadiums, event constructions, children playgrounds. Since colored film-faced plywood is water-and-wear resistant, ecologically safe and resistant to detergents this material finds good use in packing manufacture.
As the name colored film-faced plywood says there are many different colors that this material comes in. Therefore it is highly appreciated also by the furniture industry. This material finds use in furniture manufacturing, interior decoration and so on.
Specification
according to TU 5512-002-44769167-98
Dimensions, mm2440 х 1220, 1220 x 2440, 2500 х 1250, 1250 x 2500Thickness, mm6.5, 9.0, 12.0, 15.0, 18.0, 21.0, 24.0, 27.0, 30.0Tolerance on length (width)+/- 2mmGrade of face veneer1, 1/2, 2Number of pliesfrom 5 up to 21 depending on thicknessSurface colorin assortmentEdges processingby waterproof acrylic paintBasisbirch plywoodFormaldehyde emission classE1 (up to 8 mg per 100g of bone dry plywood)Water resistanceWBP markMoisture content, max5-12 %Ultimate shearing strengthnot less 1.5 MPa (birch base), not less 1.0 MPa (KOMBI base)Ultimate tensile strengthnot less 40 MPaUltimate creasing strengthnot less 60 MPaCertificationDIN 68705-3, EN 13986, EN 636-3, Russian hygienic certificate (WBP only), Russian standard GOST
Birch Wiremesh /Film Faced Plywood Birch Wiremesh Plywood is a high-quality plywood covered with resin-treated paper that turns into a protective film during production. One side of the plywood is smooth and one side is covered by wire mesh phenolic film which gives the board exceptional impact and abrasion resistance. The plywood with antislip film is widly used in truck …
Shuttering plywood coated with plastic (e.g. on the basis of polypropylene) has an outer layer of plastic instead of phenolic film, which ensures several times greater durability and resistance to abrasion. Plywood is composed from thin layers of wood veneer that are glued together with adjacent layers having their wood grain rotated up to 90 degrees to one another. Exterior …
Varnished plywood is being coated with transparent or color varnish on one or both sides on varnishing line. Basic information about product Plywood is composed from thin layers of wood veneer that are glued together with adjacent layers having their wood grain rotated up to 90 degrees to one another. The surface of raw interior plywood might be coated on …
Exterior plywood both sides (or one sidedly agreed with Customer) covered with phenolic or melamine foil, on which the hexa pattern is imprinted. Thanks to that board is anti-slip and has interesting visual effect. Foil covered surface protect board against moisture and increases resistance to mechanical damage, abrasion and atmospheric conditions. The term ‘waterproof’ refers to a glue joint which …
Interior plywood coated with melamine film is made by pressing paper saturated with melamine resin on a surface of interior plywood. The surface coated with the film improves their resistance to abrasion and protects the sheets from moisture. Product to be used in dry conditions. Basic information about product Plywood is composed from thin layers of wood veneer that are …
Exterior plywood coated with melamine film is made by pressing paper saturated with melamine resin on a surface of exterior plywood. The surface coated with the film improves their resistance to abrasion and protects the sheets from moisture. Melamine coated plywood can be produced with wiremesh finishing. Basic information about product Plywood is composed from thin layers of wood veneer …
Description It is a plywood, coated phenol film with an increased reaction to fire class Bfl-s1. It is intended for use in outdoor conditions (according to PN-EN 636), meets the requirements of bonding quality class 3 according to PN-EN 314-2. These boards show increased properties (resistance to weather conditions, surface abrasion) and are intended for use in construction, for flooring. …
Description It is a plywood made of birch wood veneers with increased fire resistance. Intended for use in exterior conditions (according to PN-EN 636), meets the requirements of bonding quality class 3 according to PN-EN 314-2. The product has been classified in the reaction to fire class B-s1, d0 according to PN-EN 13501-1. Basic data Types of plywood depending on …
Description This is the plywood with milled edges allowing to combine them using tongue-and-groove or scarf-joint edge joining. It enables faster and more accurate assembly of sheets into a large segments creating flat working surface. It is mainly used in structures such as floors, walls, roofs and semi-trailers.
Description Plywood strips are produced from deciduous plywood (birch, alder, beech) of special structure where fibres in most of veneer sheets are parallel in relation to their length, while two or four veneer plies have cross-wise arrangement of fibre for stabilisation. They are produced on the base of urea-formaldehyde resin, for use in dry conditions (according to PN-EN 636), meeting …
