Colored film-faced plywood is lightweight and resistant to corrosion attack and detergents. This material is simple to process and can easily be combined with other materials. Colored film-faced plywood is mainly used in high temperature drop conditions, in areas with moisture and is therefore a great material for open conditions.
Colored film-faced plywood is made of Northern wood which ensures the durability of the panel whereas damage resistance is ensured by high-quality import film coats on the panel. Highly water-and wear resistant colored film-faced plywood is achieved by painting the edges of the plywood with waterproof paint and film-facing it.
All of the above mentioned qualities of colored film-faced plywood make this material excellent to use in many different areas.
The film-faced panels water-and-wear resistant surface makes it a good material to use for stadiums, event constructions, children playgrounds. Since colored film-faced plywood is water-and-wear resistant, ecologically safe and resistant to detergents this material finds good use in packing manufacture.
As the name colored film-faced plywood says there are many different colors that this material comes in. Therefore it is highly appreciated also by the furniture industry. This material finds use in furniture manufacturing, interior decoration and so on.
Specification
according to TU 5512-002-44769167-98
Dimensions, mm2440 х 1220, 1220 x 2440, 2500 х 1250, 1250 x 2500Thickness, mm6.5, 9.0, 12.0, 15.0, 18.0, 21.0, 24.0, 27.0, 30.0Tolerance on length (width)+/- 2mmGrade of face veneer1, 1/2, 2Number of pliesfrom 5 up to 21 depending on thicknessSurface colorin assortmentEdges processingby waterproof acrylic paintBasisbirch plywoodFormaldehyde emission classE1 (up to 8 mg per 100g of bone dry plywood)Water resistanceWBP markMoisture content, max5-12 %Ultimate shearing strengthnot less 1.5 MPa (birch base), not less 1.0 MPa (KOMBI base)Ultimate tensile strengthnot less 40 MPaUltimate creasing strengthnot less 60 MPaCertificationDIN 68705-3, EN 13986, EN 636-3, Russian hygienic certificate (WBP only), Russian standard GOST
Explanation of the Seven Acceptance Standards for Customized Wardrobes Customized wardrobes are flexible and versatile, allowing users to freely choose their preferred layout style. However, many people are very concerned about the environmental protection of their wardrobes when choosing them. However, what kind of wardrobes are environmentally friendly? How to judge the quality of a wardrobe? Timg-2.jpeg Customized wardrobe acceptance …
Specifications and standards for quality inspection and acceptance of wardrobes Appearance quality: The surface of the wardrobe should be flat, without obvious scratches, cracks, dents, and other defects. The edges and corners should be intact and free from holidays or peeling. Structural stability: The structure of the wardrobe should be stable without looseness or shaking. The wardrobe door should be …
Testing standards and appearance quality inspection methods for melamine decorative paper Appearance quality inspection method The height of the inspection table is about 700mmThe lighting source is three 40W fluorescent tubes, with a spacing of approximately 400mm between the tubes. The length direction of the tubes is parallel to the length direction of the plate, The height of the lamp …
Testing of melamine paper veneered wood-based panels BS EN 14322:2011 Melamine veneer wood based panels refer to decorative panels that are directly coated on the surface of wooden substrates by bonding or hot pressing untreated melamine paper. Typically, the substrates are particle board, density board, etc., and are mainly used indoors. BS EN 14322:2011 Test items for melamine paper veneer …
Quality inspection of all birch plywood substrate The base material of all birch plywood is the same material, with good stability. two The density of all birch plywood substrate is higher than that of eucalyptus, with less water absorption and lower coefficient of thermal expansion and contraction. three All birch plywood substrate phenolic adhesive is formaldehyde free and environmentally friendly. …
The 12th Linyi Wood Industry Expo in 2023 Exhibition time: September 20th, 2023 to September 22nd, 2023 Exhibition address: Linyi International Convention and Exhibition Center Co organizer: 0539-5327666 Exhibition Overview The 2023 Linyi Wood Industry Expo will be held from September 20-22, 2023 at the Linyi International Convention and Exhibition Center in China, Committed to “integrating global wood industry chain …
While many traditional high-gloss wood flooring options continue to be in demand, low-gloss floors offer several benefits. Woods with low-luster hide small scratches and dents better than higher-gloss flooring – a real plus for pet owners and those with small children. Low-gloss flooring also does a better job at masking dust and buildup from footprints, making it much easier to …
SPECIES (TOP LAYER)Red Oak (2.0mm Sliced)PLANK SURFACEWirebrushedPLANK SIZE (W/T/L)7-1/2″ W x 1/2″ T x FIXED RL (up to 95-1/2″)PLANK PROFILEEngineered Tongue and GroovePLANK EDGESMicro-BeveledINSTALLATION METHODS Float, Nail, Staple or GlueFINISH / GLOSSUrethane Aluminum Oxide / Ultra LowOVER INFLOOR RADIANT HEAT?ApprovedCOVERAGE29.75 SQ. FT.RESIDENTIAL WARRANTYLifetime Finish and Lifetime Structural
Janka Hardness Test What is the Janka Hardness Test? Janka hardness test measure the hardness or density of wood. Testing is done on samples, not on actual flooring. It measures the force required to embed a 0.44″ steel ball into the wood until half of the steel ball is into the wood. It was developed as a variation of Brinell …
INSTALLATION METHODS Floating Flooring is glued together and floats on top of the subfloor. An underlayment pad is rolled out over the subfloor to protect against moisture and improve sound transmission.Glue Adhesive is spread onto the subfloor using a trowel. Flooring is then placed into the adhesive.Staple Hardwood flooring is mechanically fastened to the wood subfloor using staples, cleats or …
