Colored film-faced plywood is lightweight and resistant to corrosion attack and detergents. This material is simple to process and can easily be combined with other materials. Colored film-faced plywood is mainly used in high temperature drop conditions, in areas with moisture and is therefore a great material for open conditions.
Colored film-faced plywood is made of Northern wood which ensures the durability of the panel whereas damage resistance is ensured by high-quality import film coats on the panel. Highly water-and wear resistant colored film-faced plywood is achieved by painting the edges of the plywood with waterproof paint and film-facing it.
All of the above mentioned qualities of colored film-faced plywood make this material excellent to use in many different areas.
The film-faced panels water-and-wear resistant surface makes it a good material to use for stadiums, event constructions, children playgrounds. Since colored film-faced plywood is water-and-wear resistant, ecologically safe and resistant to detergents this material finds good use in packing manufacture.
As the name colored film-faced plywood says there are many different colors that this material comes in. Therefore it is highly appreciated also by the furniture industry. This material finds use in furniture manufacturing, interior decoration and so on.
Specification
according to TU 5512-002-44769167-98
Dimensions, mm2440 ั 1220, 1220 x 2440, 2500 ั 1250, 1250 x 2500Thickness, mm6.5, 9.0, 12.0, 15.0, 18.0, 21.0, 24.0, 27.0, 30.0Tolerance on length (width)+/- 2mmGrade of face veneer1, 1/2, 2Number of pliesfrom 5 up to 21 depending on thicknessSurface colorin assortmentEdges processingby waterproof acrylic paintBasisbirch plywoodFormaldehyde emission classE1 (up to 8 mg per 100g of bone dry plywood)Water resistanceWBP markMoisture content, max5-12 %Ultimate shearing strengthnot less 1.5 MPa (birch base), not less 1.0 MPa (KOMBI base)Ultimate tensile strengthnot less 40 MPaUltimate creasing strengthnot less 60 MPaCertificationDIN 68705-3, EN 13986, EN 636-3, Russian hygienic certificate (WBP only), Russian standard GOST
Common Processing Defects and Quality Differences Between Film Faced Plywood with Pine Core and Poplar Core Film faced plywood is a widely used construction material known for its durability, water resistance, and smooth surface. It is commonly used in concrete formwork, flooring, and other structural applications. The core material of film faced plywood plays a significant role in determining its …
**Quality Inspection Summary for Film Faced Plywood with Pine Veneer Core for Export to Europe** **Introduction:** This report summarizes the quality inspection findings for Film Faced Plywood (FFP) with pine veneer cores, specifically designed for export to Europe to circumvent EU anti-dumping duties. The focus is on three types of internal core structures: (1) FFP with a core made of …
**Quality Inspection Summary for Film Faced Plywood with Pine Core Veneer** **Introduction:** This report summarizes the quality inspection findings for Film Faced Plywood (FFP) using pine core veneer, specifically designed for export to Europe to circumvent EU anti-dumping duties. The inspection focuses on three types of internal core structures: (1) FFP with a core made of 1.5mm to 2.1mm thick …
**Quality Inspection Summary for Pine Core FILM FACED PLYWOOD** **Introduction:** This report summarizes the quality inspection findings for Pine veneer Core FILM FACED PLYWOOD, which is primarily exported to Europe to circumvent EU anti-dumping duties. The product comes in three internal structures: 1. **Three-ply Joint Pine core veneers** using 1.5mm to 2.1mm thick pine veneers. 2. **Whole pine veneer face**. 3. **Pine Engineered veneer …
Hereโs a comprehensive report on the types and classifications of wood mouldings exported to the United States, These reports are all accumulated by our QC team through years of factory inspections and quality control experience, Report on Types and Classifications of Wood Mouldings Exported to the U.S. 1. Overview Wood mouldings are essential architectural elements used for decorative and functional …
Comprehensive Quality Control Report for Finger-Jointed Pine Primed-Coated Wood MoldingPrepared by: PeterDate: Feb 19th,2025 1. Production Process Report 1.1 Raw Material Preparation Step 1: Log Selection Source: Sustainably managed pine forests (certified by FSC/PEFC). Quality Criteria: Straight grain, minimal knots, moisture content (MC) โค 12%. Step 2: Sawing & Drying Logs are cut into planks (25โ30 mm thickness). Kiln-dried to …
Quality Control Report for Engineered Multi-Layer Wood FlooringOrigin: Vietnam | Destination: United States 1. Raw Materials and Quality Specifications Engineered multi-layer wood flooring consists of layered components designed for durability and stability. Each layer is carefully selected and tested to meet international standards. A. Surface Layer (Wear Layer) Material: Premium hardwood species (e.g., oak, acacia, or hickory) with a thickness …
Quality Control Report for Wooden Computer DesksOrigin: China | Destination: Dubai, UAE 1. Raw Materials and Quality Specifications Wooden computer desks are manufactured using a combination of natural and engineered materials to ensure durability, functionality, and compliance with Dubaiโs import regulations. A. Wood Components Solid Wood: Types: Pine, rubberwood, or oak for structural frames and legs. Quality Requirements: Moisture Content: …
Quality Control Report for Wooden WardrobesOrigin: China | Destination: Australia 1. Raw Materials and Quality Specifications Wooden wardrobes are manufactured using carefully selected materials to ensure structural integrity, aesthetics, and compliance with Australian standards. A. Solid Wood and Engineered Wood Components Solid Wood: Types: Hardwoods (e.g., oak, birch) or sustainable softwoods (e.g., pine, cedar). Quality Requirements: Moisture content: 8โ12% (measured …
Quality Control Report for Cabinet Three-Piece Sets and Door PanelsManufacturing Origin: MalaysiaExport Destination: United States 1. Introduction This report outlines the quality control protocols, material specifications, production workflows, and inspection criteria for cabinet three-piece sets (carcass, door panels, and hardware) and door panels manufactured in Malaysia and exported to the U.S. The focus is on compliance with U.S. environmental regulations, …
