Colored film-faced plywood is lightweight and resistant to corrosion attack and detergents. This material is simple to process and can easily be combined with other materials. Colored film-faced plywood is mainly used in high temperature drop conditions, in areas with moisture and is therefore a great material for open conditions.
Colored film-faced plywood is made of Northern wood which ensures the durability of the panel whereas damage resistance is ensured by high-quality import film coats on the panel. Highly water-and wear resistant colored film-faced plywood is achieved by painting the edges of the plywood with waterproof paint and film-facing it.
All of the above mentioned qualities of colored film-faced plywood make this material excellent to use in many different areas.
The film-faced panels water-and-wear resistant surface makes it a good material to use for stadiums, event constructions, children playgrounds. Since colored film-faced plywood is water-and-wear resistant, ecologically safe and resistant to detergents this material finds good use in packing manufacture.
As the name colored film-faced plywood says there are many different colors that this material comes in. Therefore it is highly appreciated also by the furniture industry. This material finds use in furniture manufacturing, interior decoration and so on.
Specification
according to TU 5512-002-44769167-98
Dimensions, mm2440 х 1220, 1220 x 2440, 2500 х 1250, 1250 x 2500Thickness, mm6.5, 9.0, 12.0, 15.0, 18.0, 21.0, 24.0, 27.0, 30.0Tolerance on length (width)+/- 2mmGrade of face veneer1, 1/2, 2Number of pliesfrom 5 up to 21 depending on thicknessSurface colorin assortmentEdges processingby waterproof acrylic paintBasisbirch plywoodFormaldehyde emission classE1 (up to 8 mg per 100g of bone dry plywood)Water resistanceWBP markMoisture content, max5-12 %Ultimate shearing strengthnot less 1.5 MPa (birch base), not less 1.0 MPa (KOMBI base)Ultimate tensile strengthnot less 40 MPaUltimate creasing strengthnot less 60 MPaCertificationDIN 68705-3, EN 13986, EN 636-3, Russian hygienic certificate (WBP only), Russian standard GOST
Defects of Chinese Plywood and Their Causes: Structural Defects and Appearance Defects Glue strength defect Low bonding strength The bonding strength of plywood is lower than the specified value of the standard. The reason is that the quality of adhesive is poor; The hot pressing conditions are not well controlled, such as low hot pressing temperature, insufficient pressure or short …
Analysis and Control of Common Quality Defects of Plywood in China At present, China is a big plywood exporter and the largest plywood producer in the world. However, on the one hand, China’s plywood products are frequently squeezed by foreign trade barriers, on the other hand, they are impacted by international advanced productive forces, facing huge challenges and threats from …
Technical Parameters of Ultralam Note: For the production of special batches of Ultralam LVL with high-grade veneer layers (according to the specification), design strength values can be increased by 15 – 20%. CONDITION RELATIVE TO THE GRAIN Rb Rs R X I 23,5 22,5 22 3,8 1,7 16,5 — 2,6 1,1 edgewise along the …
Timber in Australia is treated to six levels called Hazard (H) Classes. These treatment levels indicate where the treated product may be used. Hazard ClassWhere the treated wood may be usedWhat the timber is protected againstH1Inside, under cover, protected from the weather and well ventilatedInsectsH1.2**Inside, under cover, protected from the weather subject to moistureInsects and decayH2Inside, under cover, protected from …
Structural Composite Lumber: Laminated Veneer Lumber Laminated veneer lumber (LVL) is produced from veneer and intended for structural framing, where high strength and stiffness are required. Softwoods, such as Douglas-fir and southern pines, are typically used. Some hardwoods are also acceptable. As it is a structural product, only high-quality veneer with high strength and stiffness is acceptable. Unlike plywood, all of …
Treated Birch Plywood meeting the requirements of Euro Class B. Suitable for structural applications. Individual birch veneers are soaked in PW-640 (a fire retardant liquid solution) prior to gluing and pressing. This means that augmented fire retardant performance can be achieved as part of the product’s production process and applies to the entirety of the finished panel. This method of …
PVC flooring is popularly known as vinyl flooring. It is more suitable for the cold climate. Vinyl flooring is composed of polyvinyl chloride (PVC), . Vinyl flooring is a great choice, particularly for kitchen and bathroom applications. With its water-resistant, stain-resistant, versatile, and durable …
UV MDF Board: It’s acrylic UV coating paint on melamine MDF Board, then use UV machine to cure and shape it. As we no need to wait for dry, the production are easier.
