Colored film-faced plywood is lightweight and resistant to corrosion attack and detergents. This material is simple to process and can easily be combined with other materials. Colored film-faced plywood is mainly used in high temperature drop conditions, in areas with moisture and is therefore a great material for open conditions.
Colored film-faced plywood is made of Northern wood which ensures the durability of the panel whereas damage resistance is ensured by high-quality import film coats on the panel. Highly water-and wear resistant colored film-faced plywood is achieved by painting the edges of the plywood with waterproof paint and film-facing it.
All of the above mentioned qualities of colored film-faced plywood make this material excellent to use in many different areas.
The film-faced panels water-and-wear resistant surface makes it a good material to use for stadiums, event constructions, children playgrounds. Since colored film-faced plywood is water-and-wear resistant, ecologically safe and resistant to detergents this material finds good use in packing manufacture.
As the name colored film-faced plywood says there are many different colors that this material comes in. Therefore it is highly appreciated also by the furniture industry. This material finds use in furniture manufacturing, interior decoration and so on.
Specification
according to TU 5512-002-44769167-98
Dimensions, mm2440 х 1220, 1220 x 2440, 2500 х 1250, 1250 x 2500Thickness, mm6.5, 9.0, 12.0, 15.0, 18.0, 21.0, 24.0, 27.0, 30.0Tolerance on length (width)+/- 2mmGrade of face veneer1, 1/2, 2Number of pliesfrom 5 up to 21 depending on thicknessSurface colorin assortmentEdges processingby waterproof acrylic paintBasisbirch plywoodFormaldehyde emission classE1 (up to 8 mg per 100g of bone dry plywood)Water resistanceWBP markMoisture content, max5-12 %Ultimate shearing strengthnot less 1.5 MPa (birch base), not less 1.0 MPa (KOMBI base)Ultimate tensile strengthnot less 40 MPaUltimate creasing strengthnot less 60 MPaCertificationDIN 68705-3, EN 13986, EN 636-3, Russian hygienic certificate (WBP only), Russian standard GOST
Comprehensive Quality Control Report for Finger-Jointed Pine Primed-Coated Wood MoldingPrepared by: PeterDate: Feb 19th,2025 1. Production Process Report 1.1 Raw Material Preparation Step 1: Log Selection Source: Sustainably managed pine forests (certified by FSC/PEFC). Quality Criteria: Straight grain, minimal knots, moisture content (MC) ≤ 12%. Step 2: Sawing & Drying Logs are cut into planks (25–30 mm thickness). Kiln-dried to …
Quality Control Report for Engineered Multi-Layer Wood FlooringOrigin: Vietnam | Destination: United States 1. Raw Materials and Quality Specifications Engineered multi-layer wood flooring consists of layered components designed for durability and stability. Each layer is carefully selected and tested to meet international standards. A. Surface Layer (Wear Layer) Material: Premium hardwood species (e.g., oak, acacia, or hickory) with a thickness …
Quality Control Report for Wooden Computer DesksOrigin: China | Destination: Dubai, UAE 1. Raw Materials and Quality Specifications Wooden computer desks are manufactured using a combination of natural and engineered materials to ensure durability, functionality, and compliance with Dubai’s import regulations. A. Wood Components Solid Wood: Types: Pine, rubberwood, or oak for structural frames and legs. Quality Requirements: Moisture Content: …
Quality Control Report for Wooden WardrobesOrigin: China | Destination: Australia 1. Raw Materials and Quality Specifications Wooden wardrobes are manufactured using carefully selected materials to ensure structural integrity, aesthetics, and compliance with Australian standards. A. Solid Wood and Engineered Wood Components Solid Wood: Types: Hardwoods (e.g., oak, birch) or sustainable softwoods (e.g., pine, cedar). Quality Requirements: Moisture content: 8–12% (measured …
Quality Control Report for Cabinet Three-Piece Sets and Door PanelsManufacturing Origin: MalaysiaExport Destination: United States 1. Introduction This report outlines the quality control protocols, material specifications, production workflows, and inspection criteria for cabinet three-piece sets (carcass, door panels, and hardware) and door panels manufactured in Malaysia and exported to the U.S. The focus is on compliance with U.S. environmental regulations, …
Quality Control Report for Far-Infrared Sauna RoomsManufacturing Origin: Xuzhou, ChinaExport Destination: United States 1. Introduction This report provides a comprehensive overview of the quality control protocols, material specifications, production processes, and inspection methodologies for far-infrared sauna rooms manufactured in Xuzhou, China, and exported to the United States. Emphasis is placed on compliance with U.S. safety regulations, material sustainability, and performance …
Quality Control Report for Finger-Jointed Pine Wood Molding with Clay CoatingManufacturing Origin: VietnamExport Destination: United States 1. Introduction This report details the quality control procedures, material specifications, production processes, and inspection criteria for finger-jointed pine wood molding with clay coating manufactured in Vietnam and exported to the U.S. Emphasis is placed on compliance with U.S. environmental regulations, structural integrity, and …
Reliable QC & Sourcing Partner for Vietnamese White Birch & Specialty Plywood Dear Customers, I hope this message finds you well. My name is Peter, and I specialize in quality assurance and supply chain coordination for Vietnamese hardwood plywood, including white birch, maple, red oak, and HPL products. With a proven track record of supporting U.S. importers, I’d like to …
Experienced Vietnam-Based QC Inspector for Film Faced Plywood – Expertise in Quality & Factory Sourcing Dear Customers, I hope this email finds you well. My name is Peter, and I specialize in quality control (QC) and supplier coordination for film faced plywood in Vietnam. Having supported numerous European importers, I am writing to offer my services as your dedicated QC …
Trusted QC Partner for Vietnam-Sourced Cabinets & Vanities – Anti-Dumping Compliance Assured Dear Customers, I hope this message finds you well. My name is Peter, and I specialize in quality control and supply chain coordination for kitchen cabinets, bathroom vanities, and custom millwork sourced from Vietnam and Southeast Asia. With [X years] of experience supporting U.S. and Canadian importers, I …
