Panel overlaid on side with film MDO 367 g/m2 boards for concrete forming
General Specifications
- Allows up to 10 to reuses in the MDO face (requires reasonable care). Main face with MDO of 367 g/m2 and back face doesn´t have paper.
- 35% phenolic resin in MDO.
Product Features and Applications
- Tulsa MDO Concrete Forming panels are edge sealed during manufacturing. If you have to cut boards during use, it is recommended to re-seal the fresh edges to avoid panel damage caused by capillary penetration of humidity.
- Make sure to also use the appropriate form remover or release agent (a chemical reactive releases for nonporous surfaces).
- Although cleaning a Tulsa MDO Concrete Form panel is much easier and quicker than traditional form material, it is important to only use fiber spatulas and synthetic materials when cleaning forms to prevent damages to the faces.This damage might occur when using metallic tools. Always store the panels inside a warehouse, protected from weather conditions.
- While MDO Concrete Forming panels are very resistant to the abrasion and impact, care must be taken during cleaning and use to prevent damage. Always use the appropriate vibrators and techniques to protect the panel surface.
Size
Thickness:
- 12 mm = 15 / 32”
- 15 mm = 19 / 32”
- 18 mm = 23 / 32”
- 21 mm = 27 / 32”
Dimensions:
- Width 1,220 m = 4′
- Length 2,440 m = 8′
- Width 1,250 m = 4 3/22
- Length 2,500 m = 8 13/64
