Structural Plywood

None Structural Plywood 17mm None Structural Plywood （Hoarding plywood）15mm None Structural Plywood （Hoarding plywood） 12mm None Structural Plywood （Hoarding plywood） 9mm None Structural Plywood （Hoarding plywood）

NON-STRUCTURAL PLYWOOD Non-Structural Ply 7mm CD2400 x 1200 / 2700 x 120075/packNon-Structural Ply 9mm CD2400 x 1200 / 2700 x 120060/packNon-Structural Ply 12mm CD2400 x 1200 / 2700 x 120045/packNon-Structural Ply 15mm CD2400 x 1200 / 2700 x 120035/packNon-Structural Ply 17mm CD2400 x 1200 / 2700 x 120032/packNon-Structural Ply 19mm CD2400 x 1200 / 2700 x 120028/packNon-Structural Ply 21mm CD2400 …

STRUCTURAL PLYWOOD Structural Ply 7mm CD2400 x 1200 / 2700 x 120075/packStructural Ply 9mm CD2400 x 1200 / 2700 x 120060/packStructural Ply 12mm CD2400 x 1200 / 2700 x 120045/packStructural Ply 15mm CD2400 x 1200 / 2700 x 120035/packStructural Ply 17mm CD2400 x 1200 / 2700 x 120032/packStructural Ply 19mm CD2400 x 1200 / 2700 x 120028/packStructural Ply 21mm CD2400 …

This product possesses very similar characteristics to the CD Structural plywood, as it is also a Radiata Pine species, available in ‘C/D’ face grades and contains an A-Bond glue line making it suitable for exterior applications. While this product has not been structurally rated, it can be used for many general purposes when a stress grading is not required. Face …

SELEX  PLYWOOD CD No Structural AUS Selex Radiata Pine Non-Structural Plywood has a variety of uses throughout the construction industry, particularly when structural characteristics are not required, whether that means not bearing weight or in cases where there is no requirement to meet the construction codes of Australia or New Zealand. This product offers one side that allows for a …

structural plywood is manufactured to AS/NZS 2269 with a permanent Type A phenolic resin. Structural plywood suits most building applications and comes in many sheet sizes, thicknesses and face grades. Common veneer face grades are CD & DD as well as appearance grade.‘C’ face is a non-appearance grade where knots and defects are filled. ‘D’ face is non appearance, where limited …

Austral Premium Structural Appearance grade plywood with more natural characteristics BB Face GradesExterior A Bond GlueF17 Structural Rating  HOOP PINE plywood is produced in Brisbane Australia by Austral Plywoods. Although Austral produce higher grades of plywood that are available this BB Grade with a structural rating and exterior glue bond is an extremely high grade when comparing with standard options …

Hoop Pine and Klinki Pine, including Formply and Noise Barrier. Our plywood is certified by the Engineered Wood Products Association of Australia (EWPAA) to AS2269 (Structural & Noise Barrier) AS6669 (Formply) and AS 2271 (Exterior). All panels are constructed using Type A- Bond, WBP glue. Hoop Faced Exterior Plywood EWPAA CERTIFIED EXTERIOR AC HOOP FACED ASNZ 2271 – Type A …

STANDARDS AUSTRALIA/STANDARDS NEW ZEALANDAustralian/New Zealand StandardPlywood—StructuralPart 0: SpecificationsSECTION 1 SCOPE AND GENERAL1.1 SCOPEThis Standard specifies requirements for the manufacture, grading, finishing and brandingof structural plywood. Specifications for both stress and surface grades are also provided.The Standard also specifies veneer quality, bond quality, standard lay-up construction,dimensional tolerances, joints, moisture content and characteristic strength and stiffnessvalues for the nominated F-grades.The following alternative …

This Standard was prepared by the Joint Standards Australia/Standards New ZealandCommittee TM-008, Plywood Timber Products, to supersede AS/NZS 2269:2004,Plywood—Structural.The objective of this Standard is to provide minimum performance requirements andspecifications for the manufacture and application of structural plywood, acceptable tousers, specifiers, manufacturers, and building authorities in Australia and New Zealand.Plywood manufactured to this Standard is suitable for use in permanent …