Quality Control Inspection and Assurance

Spot check 40 batches of wood-based panel products, 3 batches are unqualified On November 10, 2022, 40 batches of wood-based panel products from 19 companies were spot checked, and 3 batches were found to be unqualified. According to the requirements of SZJG52-2016 Limit of Harmful Substances in Finished Furniture and Raw and Auxiliary Materials, Code for Implementation of Random Inspection …

The qualification rate of three batches of wood-based panel products is 100% On November 30, 2022, three batches of wood-based panel products were sampled and inspected, all of which were qualified, with a qualification rate of 100%. This random inspection of wood-based panel product quality supervision is mainly based on the following standards: Plywood for Concrete Formwork (GB/T 17656-2018), Bamboo …

2 batches of MDF fail to pass the sampling inspection On November 13, 2022, the second batch of MDF products in the production field will be subject to supervision and random inspection, including 30 batches of MDF products. In this spot check, according to the requirements of such standards as Medium Density Fiberboard (GB/T 11718-2009) and Indoor Decoration Materials, Wood …

Random inspection items and common quality defects of density fiberboard in November 2022 In this spot check of 80 batches of MDF products produced by 17 enterprises, 12 batches of MDF products were found to be unqualified, and the rate of unqualified products was 15%, 8.1 percentage points lower than the last spot check. The static bending strength, internal bonding …

Quality supervision and spot check of particle board products and common quality defects According to the requirements of such standards as Chipboard (GB/T 4897-2015) and Indoor Decoration Materials – Wood based Panels and Their Products – Limits of Formaldehyde Release (GB 18580-2017), spot checks were conducted on the water absorption thickness expansion rate, static bending strength, internal bonding strength, surface …

Random inspection of MDF product quality supervision and common quality defects Common spot checks are carried out according to the requirements of such standards as Medium Density Fiberboard (GB/T 11718-2009) and Indoor Decoration Materials – Wood based Panels and Their Products – Limits for Formaldehyde Release (GB 18580-2017). The water absorption thickness expansion rate, static bending strength, internal bonding strength, …

Medium density fiberboard, as the raw materials purchased are not strictly controlled, resulting in insufficient viscosity of the glue, which may break and delamination in use, posing a certain potential safety hazard to consumers.

Sampling Inspection Results of Plywood Product Quality in Vietnam in November 2022 In November 2022, the second batch of plywood products in the production field were inspected by supervision and random inspection, and no unqualified products were found. According to the requirements of GB/T 9846-2015 Plywood, GB 18580-2017 Limits of Formaldehyde Emission from Wood based Panels and Their Products as …

Proposal for Legal Inspection of Scaffolding plywood, The plywood for concrete-formBy the Bureau of Standards, Metrology and Inspection (BSMI), Ministry of Economic AffairsBackground:Scaffolding plywood, the plywood for concrete-form have been widely used as a kind ofbuilding materials these days. The public is concerned about pollution of indoor air byformaldehyde emitted from adhesive bonded wood products and demands restriction on the …

Timber Products Inspection offers programs for: https://www.tpinspection.com/auditing-services/panels/wood-panels-auditing Plywood (PS1 / PS2 (US) CSA (Canada) JAS (Japan) and AS/NZS (Australian/New Zealand)Oriented Strand Board (OSB) – PS2( US) CSA O325 (Canada) and JAS (Japan)Wood Panel Siding ANSI/APA PRP 210-2014Particleboard ANSI A208.1 (US)Medium-density fiberboard(MDF) – ANSI A208.2 (US)Hardwood Plywood ANSI A135.4Hardwood and Decorative Plywood ANSI/HP-2004For further information please email us or contact our …