admin

F11, F14, F17 T&G Flooring Plywood Australian Standard AS2269 INSPECTION,TESTING,SOURCING

T&G Flooring PlywoodAustralian Standard AS2269 AS2269 is a Structural Plywood made to meet various strength ratings such as F11, F14, F17 Tongue and Groove (T&G) Flooring ply is very durable and is pre-sanded for the best finish. It has a machined groove, as well as a tongue to ensure a seamless join when it is laid.  T&G can be used …

Read More »

China Eucalyptus core with Gaboon/Okoume faces Large Size Plywood oversize Jumbo sheets Inspection,testing and sourcing

Large Size Plywood The standard size ply sheets are 2400 x 1200 and  2440 x 1220, most sheets with come in ONE ONLY of these sizes.We can also get oversize or Jumbo sheets with Eucalyptus core with Gaboon/Okoume faces in exterior ply with a marine glue made to European Standard EN636-2S.  See Picture to right for picture of this ply.They …

Read More »

CHINESE Marine Plywood Australian Standard AS2272 inspection,testing,sourcing

Marine PlywoodAustralian Standard AS2272 Plywood manufactured with Marine “A” Bond glue is not always “Marine Ply”  most ply with marine glue is a lower grade and very lower price. All Marine AS2272 grade plywood will have a stamp on the back of the sheet as above with AS2272 noted on stamp. Click on the “MARINE PLYWOOD” tab above for more …

Read More »

Marine Plywood British Standard BS 1088 inspection,testing,sourcing

Marine PlywoodBritish Standard BS 1088 Plywood manufactured with Marine “A” Bond glue is not always “Marine Ply”  most ply sold in Australia with marine glue is a lower grade and at a very low price as compared to “Marine Plywood”  Remember , if it is priced at a low price, it is to good to be true, and not “Marine …

Read More »

STANDARDS AUSTRALIA/STANDARDS NEW ZEALAND AS/NZS 2269.0:2008 Structural Plywood Inspection,testing,sourcing

STANDARDS AUSTRALIA/STANDARDS NEW ZEALANDAustralian/New Zealand StandardPlywood—StructuralPart 0: SpecificationsSECTION 1 SCOPE AND GENERAL1.1 SCOPEThis Standard specifies requirements for the manufacture, grading, finishing and brandingof structural plywood. Specifications for both stress and surface grades are also provided.The Standard also specifies veneer quality, bond quality, standard lay-up construction,dimensional tolerances, joints, moisture content and characteristic strength and stiffnessvalues for the nominated F-grades.The following alternative …

Read More »

Australian/New Zealand Standard™ AS/NZS 2269.0:2008 Structural Plywood Inspection,testing and sourcing

This Standard was prepared by the Joint Standards Australia/Standards New ZealandCommittee TM-008, Plywood Timber Products, to supersede AS/NZS 2269:2004,Plywood—Structural.The objective of this Standard is to provide minimum performance requirements andspecifications for the manufacture and application of structural plywood, acceptable tousers, specifiers, manufacturers, and building authorities in Australia and New Zealand.Plywood manufactured to this Standard is suitable for use in permanent …

Read More »

China Pourform-HDO & Pourform HAO 100/30, 100/100 & 120/30, 120/120 inspection,testing and sourcing

Pourform-HDO & Pourform HAO Concrete-forming panels are ideal for high-rise or other large-scale projects where a high quality finish is required. They are specially engineered for demanding gang-form and system applications, and provide exceptional strength and reusability. 100/30, 100/100 & 120/30, 120/120 Pourform-HDO panels produce a consistently smooth, glossy concrete surface, eliminating sugaring and minimizing finishing requirements. 100: 15-25 reuses. …

Read More »

China MDO – CONCRETE FORMING Pourform 107 Plus inspection ,testing and sourcing

Our MDO panels are manufactured from Douglas fir logs that have been carefully selected for their tight grain in order to ensure each panel is exceptionally strong, rigid and dimensionally stable. The overlay is bonded to the panel face under high heat and pressure to create a hard, durable surface that resists abrasion and moisture, as well as making the …

Read More »

CHINA APA RATED SHEATHING PLYWOOD INSPECTION ,TESTING AND SOURCING

APA rated Sheathing (pronounced sheeting) grades define veneer appearance in terms of natural unrepaired growth characteristics and allowable number and size of repairs that may be made during manufacture Sheathing is a layer of plywood sometimes installed on floors (as subflooring), walls (keeps the neighbors from seeing what you are doing) and roofs (a buildings blanket). The plywood sheets range …

Read More »

MDO Plywood inspection,testing and sourcing

MDO Plywood (Medium Density Overlay) MDO gives a matt surface finish to the struck concrete and minimises grain pattern transfer. Spruce MDO is light weight and easy to handle on site. Form MDO panels Standard Panels 18mm 2440 x 1220 packs (50) sheets Technical Specifications MDO Face: Resin impregnated craft paper. Must be oiled twice prior to first use and …

Read More »