Particle Board Technical Specification,inspection checklist ,inspectors,sourcing agent

Property	Method	Requirement
Thickness	EN324-1	-0.3mm/+0.5mm (with MFC)
Length and Width	EN324-1	+/-0.5mm
Edge Straightness Tolerance	EN324-2	1.5mm per m
Squareness Tolerance	EN324-2	2mm per m
Moisture Content	EN322	5% to 13%
Formaldehyde Emission
Class 2 (E2)	EN120	8mg/100g < x30mg/100g
Class 1 (E1)	EN120	8mg/100g
F (EO)	MFN-1549	0.5mg/L
F (Super EO)	MFN-1549	0.3mg/L

Property	Method	Unit	9, 12mm	15, 16mm, 18mm	25mm	30mm
P2	P2	P5	P2	P5*	P2	P5*
Bending Strength	EN310	N/mm2	13	13	16	11.5	14	10	12
Internal Bond	EN319	N/mm2	0.4	0.35	0.45	0.3	0.4	0.25	0.35
Modulus of Elasticity in Bending	EN310	N/mm2	1800	1600	2400	1500	2150	1350	1900
Surface Soundness	EN311	N/mm2	0.8	0.8	N/A	0.8	N/A	0.8	N/A
Swelling in Thickness- 24 Hour Immersion	EN317	%	N/A	N/A	10	N/A	10	N/A	10

Test	Test Method	Result
Heat Resistant	Lighted cigarette placed on the surface of test sampleSample placed is over and baked at 70°C for 24 hoursAluminium container containing oil superheated to 180°C placed on sample of 20 minutes	Stain easily removed by wet clothNo hairline cracks observed using a 6x magnifying glassNo marks or any changes
Abrasion Resistant	Taber abraser applied at 500 gram on the sample surface	Insignificant abrasion of surface sample
Stream Resistant	Test sample placed on top of a breaker of boiling water for an hour	No fault observed
Chemical or Stain Resistant	Surface of test sample exposed to various chemicals and stains: Alcali, Petroleum Products, Coffee, Animal Oil, Vegetable Oil/Sause, Soap/Detergent, Tea, Vineger, Sugar, Ink, Lip-Stick, Nail-Polish, Milk/Milk Products, Ammonial/Ammonium Chloride, Shoe-Polish	No fault or stains observed on sample in all cases

Plywood Furniture Hardware Flooring Inspection Sourcing Wood Baseld Panels Furniture Hardware Tools Sauna Kitchen Cabinets Wardrobes