PLywood LVL Certification and Construction Standards for Australia and New Zealand

Quality Control Inspection and Assurance 26 Views

Facebook X

Construction Standards (Original please visit https://www.bsigroup.com/en-AU/Benchmark-Product-Certification/Construction/ )

ANSI Z97.1 Safety Glazing Materials Used In Buildings – Safety Performance Specifications And Methods Of Test
AS 1288 Glass in buildings – Selection and installation
AS 1316 Masonry cement
AS 1476 Metric wood screws
AS 1657 Fixed platforms, walkways, stairways and ladders – Design, construction and installation
AS 1672.1 Limes and limestones – Limes for building
AS 1725.1 Chain link fabric fencing Security fences and gates – General requirements
AS 1905.1 Components for the protection of openings in fire-resistant walls Fire-resistant doorsets
AS 2049 Roof Tiles
AS 2369.1 Materials for solar collectors for swimming pool heating Rubber materials
AS 2688 Timber doors
AS 2689 Timber doorsets
AS 2858 Timber – Softwood – Visually stress-graded for structural purposes
AS 3582.1 Supplementary cementitious materials for use with portland and blended cement – Fly ash
AS 3582.2 Supplementary cementitious materials for use with portland and blended cement – Slag – Ground granulated iron blast-furnace
AS 3610 Formwork for concrete
AS 3634 Solar heating systems for swimming pools
AS 3648 Specification and methods of test for packaged concrete mixes
AS 3715 Metal finishing – Thermoset powder coating for architectural applications of aluminium and aluminium alloys
AS 3850.2 Prefabricated concrete elements Building construction
AS 3972 General purpose and blended cements
AS 3996 Access covers and grates
AS 4084 Steel storage racking
AS 4123.1 Mobile waste containers Containers with two wheels and a capacity up to 400 L for lifting devices – Dimensions and design
AS 4123.2 Mobile waste containers Containers with four wheels with a capacity from 500 L to 1200 L with flat lid(s), for trunnion and/or lifting devices – Dimensions and design
AS 4123.3 Mobile waste containers Containers with four wheels with a capacity from 770 L to 1300 L with dome lid(s), for trunnion and/or lifting devices – Dimensions and design
AS 4123.4 Mobile waste containers Containers with four wheels with a capacity from 750 L to 1700 L with flat lid(s), for wide trunnion or BG and/or wide comb lifting devices – Dimensions and design
AS 4123.5 Mobile waste containers Performance requirements and test methods
AS 4145.5 Locksets and hardware for doors and windows Controlled door closing devices (EN 1154:1997, MOD)
AS 4256.2 Plastic roof and wall cladding materials – Unplasticized polyvinyl chloride (uPVC) building sheets
AS 4256.3 Plastic roof and wall cladding materials – Glass fibre reinforced polyester (GRP)
AS 4256.4 Plastic roof and wall cladding materials – Unplasticized polyvinyl chloride (uPVC) wall cladding boards
AS 4256.5 Plastic roof and wall cladding materials – Polycarbonate
AS 4419 Soils for landscaping and garden use
AS 4420.0 Windows – Methods of test General introduction and list of methods
AS 4454 Composts, soil conditioners and mulches
AS 4586 Slip resistance classification for new pedestrian surface material
AS 4662 Ceramic tiles – Definitions, classification, characteristics and marking
AS 4785.1 Timber – Softwood – Sawn and milled products – Product specification
AS 4785.2 Timber – Softwood – Sawn and milled products – Grade description
AS 5039 Security screen doors and security window grilles
AS 5068 Timber – Finger joints in structural products – Production requirements
AS 5082.1 Polybutylene (PB) plumbing pipe systems – Metric series – Metric polybutylene (PB) pipes for hot and cold water applications
AS 5082.2 Polybutylene (PB) plumbing pipe systems – Metric series – Mechanical and fusion jointing systems
AS 5146.1 Reinforced Autoclaved Aerated Concrete – Structures
AS 5146.2 Reinforced Autoclaved Aerated Concrete – Design
AS 5146.3 Reinforced Autoclaved Aerated Concrete – Construction
AS 6669 Plywood – Formwork
AS/NZS 1328.1 Glued laminated structural timber Performance requirements and minimum production requirements
AS/NZS 1546.1 On-site domestic wastewater treatment units – Septic tanks
AS/NZS 1546.2 On-site domestic wastewater treatment units Waterless composting toilets
AS/NZS 1546.3 On-site domestic wastewater treatment units – Aerated wastewater treatment systems
AS/NZS 1546.4 On-site domestic wastewater treatment units Domestic greywater treatment systems
AS/NZS 1571 Copper – Seamless tubes for airconditioning and refrigeration
AS/NZS 1576.1 Scaffolding General requirements
AS/NZS 1576.2 Scaffolding Couplers and accessories
AS/NZS 1576.3 Scaffolding Prefabricated and tube-and-coupler scaffolding
AS/NZS 1576.4 Scaffolding Suspended scaffolding
AS/NZS 1576.5 Scaffolding Prefabricated splitheads and trestles
AS/NZS 1577 Scaffold decking components
AS/NZS 1838 Swimming pools – Premoulded fibre-reinforced plastics – Design and fabrication
AS/NZS 1859.1 Reconstituted wood-based panels – Specifications Particleboard
AS/NZS 1859.2 Reconstituted wood-based panels – Specifications Dry-processed Fibreboard
AS/NZS 1859.3 Reconstituted wood-based panels – Specifications Decorative overlaid wood panels
AS/NZS 1859.4 Reconstituted wood-based panels – Specifications Wet-processed Fibreboard
AS/NZS 1860.1 Particleboard Flooring Specification
AS/NZS 2208 Safety glazing materials in buildings
AS/NZS 2269 Plywood – Structural
AS/NZS 2270 Plywood and blockboard for interior use
AS/NZS 2272 Plywood – Marine
AS/NZS 2343 Bullet-resistant panels and elements
AS/NZS 2588 Gypsum plasterboard
AS/NZS 2610.2 Spa pools – Private spas
AS/NZS 2712 Solar and heat pump water heaters – Design and construction
AS/NZS 2728 Prefinished/prepainted sheet metal products for interior/exterior building applications – Performance requirements
AS/NZS 2803.1 Doors – Security screen – Hinged
AS/NZS 2904 Damp-proof courses and flashings
AS/NZS 2908.1 Cellulose-cement products Corrugated sheets
AS/NZS 2908.2 Cellulose-cement products – Flat sheet
AS/NZS 3582.3 Supplementary cementitious materials for use with portland and blended cement – Amorphous silica
AS/NZS 4058 Precast concrete pipes (pressure and non-pressure)
AS/NZS 4114.1 Spray painting booths, designated spray painting areas and paint mixing rooms – Design, construction and testing
AS/NZS 4114.2 Spray painting booths, designated spray painting areas and paint mixing rooms – Installation and maintenance
AS/NZS 4131 Polyethylene (PE) compounds for pressure pipes and fittings
AS/NZS 4256.3 Plastic roof and wall cladding materials – Glass fibre reinforced polyester (GRP)
AS/NZS 4256.6 Plastic roof and wall cladding materials – Glass fibre reinforced polyester (GRP)
AS/NZS 4357.0 Structural laminated veneer lumber – Specifications
AS/NZS 4389 Roof safety mesh
AS/NZS 4422 Playground surfacing – Specifications, requirements and test method
Composts, soil conditioners and mulches
AS/NZS 4455.1 Masonry units, pavers, flags and segmental retaining wall units – Masonry units
AS/NZS 4455.3 Masonry units, pavers, flags and segmental retaining wall units – Segmental retaining wall units
AS/NZS 4488.1 Industrial rope access systems Specifications
AS/NZS 4505 Garage doors and other large access doors
AS/NZS 4666 Insulating glass units
AS/NZS 4766 Polyethylene storage tanks for water and chemicals
AS/NZS 4858 Wet area membranes
AS/NZS 4859.1 Materials for the thermal insulation of buildings – General criteria and technical provisions
AS/NZS 4999 PVC-U maintenance shafts
ASTM C 1048 Standard Specification for Heat-Treated Flat Glass – Kind HS, Kind FT Coated and Uncoated Glass
ASTM C 1172 Standard Specification for Laminated Architectural Flat Glass
ISO 8336 Fibre-cement flat sheets – Product specification and test methods
ISO 21005 Ships and marine technology – Thermally toughened marine safety glass panes for windows and side scuttles
NZS 2295 Pliable, permeable building underlays
NZS 4211 Specification for performance of windows
NZS 4218 Thermal insulation – Housing and small building
NZS 4223.1 Code of practice for glazing in buildings – Glass selection and glazing
NZS 4223.2 Glazing in buildings – Part 2: Insulating glass units
NZS 4223.4 Glazing in buildings – Part 4: Wind, dead, snow, and live actions
NZS 4454 Composts, soil conditioners and mulches
NZS 8500 Safety barriers and fences around swimming pools, spas and hot tubs

Plywood Furniture Hardware Flooring Inspection Sourcing Wood Baseld Panels Furniture Hardware Tools Sauna Kitchen Cabinets Wardrobes

PLywood LVL Certification and Construction Standards for Australia and New Zealand

Related Articles

Construction Standards (Original please visit https://www.bsigroup.com/en-AU/Benchmark-Product-Certification/Construction/ )